DIY Santa Claus made from paper- This is an interesting option for children's creativity in winter. You can do such crafts in kindergarten, in primary school, in the company of children in extracurricular activities, and with parents at home. Paper is a very simple material that will be interesting to work with both very young children and adults, and for each age category we have interesting techniques, which we will talk about in more detail today.
The paper plate needs to be folded, but not in half, but about a quarter of the plate, we will use the remaining part to create a face for our Santa. We will also need beige paints (you can mix white and yellow). With these paints we need to decorate the inner circle of our plate, leaving the wavy edges white.
It will have a fluffy nose, we will make it from threads following the example of a pompom for hats, using yellow or orange threads. The pompom for the cap can turn out to be just as fluffy, or it can be cut out from white paper. Near the nose we will have a mustache consisting of two elements that need to be cut out. The eyes can be made from two parts: cut out a white and black circle, the black one should be smaller in size and glue them together, placing one on top of the other, and then glue them to the plate. Our face is ready.
All that remains is to decorate the sharp edge of the triangle with a white pom-pom circle for the hat. And glue a paper rectangle over the plate - a strip that will mark the beginning of the cap. To make it look like this DIY paper Santa Claus, diagram you won’t need it at all, you can look at the photo example and repeat it using the materials available to you for children’s creativity.
DIY paper Santa Claus: diagram
You've probably already looked at a lot of master classes on the Internet on how to make one, but most of the descriptions presented are more suitable for adults; these ideas will be too complex for children's creativity. It will be interesting for kids to work with multi-colored paper sheets, sheets of cardboard, cut out various figures with scissors and glue them to the surface.
First, you can watch with your child on the computer how it’s done. DIY paper Santa Claus video, and then invite the baby to make the same figure on his own.
The main decoration of Grandfather Frost is, of course, his luxurious beard, and we definitely have to make it for our paper old man, besides, it’s so easy to implement using only white paper and scissors.
However, before making the ford, we need to complete the base; for this we will use colored cardboard - preferably choose red. The cardboard can be one-sided, because we will roll it into a cone. We will also need a sheet of plain paper or corrugated paper; it will definitely make a voluminous and curly beard. As always, the main assistants in completing this children's craft will be ordinary stationery scissors and PVA glue.
On the cardboard you need to draw a contour: a circular sector (almost a semicircle). You can see which figure should be drawn on cardboard in the step-by-step master class. From this sector we will make the basis for our future craft. The most beautiful and bright base will be red, but you can also use blue cardboard. Such figures will become an original decoration for the New Year tree, and even preschool children can complete the task without the help of adults.
Do-it-yourself voluminous Santa Claus made of paper we will have it on a cone-shaped base, so the semicircle needs to be rolled up and the edges glued together. The joint can additionally be taped. The base can be in the form of a non-sharp cone, i.e. At the back you will staple only the edges of our circular sector.
We need to cut out a small circle from a white sheet of paper, this will be the face of our craft, and a long white strip, from which we will make a curly beard and bangs.
Now he will process the edge of the white strip: one side must be cut into strips, without cutting to the end, since in children's appliqués we make grass under a tree or flower. Since our beard should be curly, we can add volume to it by twisting the stripes onto a match or pen rod. Now you will see how luxurious the beard of the future main symbol of the New Year turned out.
DIY Santa Claus from colored paper can become a toy on the New Year tree, but for this you need to make a loop on top. You should cut out two mittens from brown cardboard; if you don’t have cardboard of the corresponding color, you can cut out the elements from white paper and then paint them with the chosen color or even make an interesting geometric pattern on the mittens. The mittens should be glued to the sides, slightly below the head.
In the middle of the base on the front side, we first glue a white circle, draw eyes and a mouth on it, make a carrot nose, glue a piece of “curly” paper on the sides, below and above the face. When the glue dries, our craft is ready to become an interior decoration.
DIY Santa Claus from colored paper
DIY paper Santa Claus toy in the origami technique, this is a task for a real master, at least that’s what it seems when you first see the diagram for its implementation. But if the kids enjoy making paper boats and airplanes, then you can focus their attention on other figures that can be made using this oriental technique.
If you make several of these figures, then by attaching them to a thread, you will get an original New Year’s garland that you can use to decorate a child’s room where it is too early to put up a Christmas tree or hang Christmas balls.
This craft will be a great pastime for the whole family; you can organize a small family competition to see who can create the most beautiful Santa Claus using the origami technique.
We will make origami from a colored sheet: on one side it should be red and on the other white. The sheet must be given a square shape by cutting off the excess part. Origami is always performed according to the following pattern: a square sheet is folded in the correct sequence until the required flat figure is obtained. The origami technique is famous for the fact that it allows you to get a bizarre, complex figure without using a drop of glue or scissors to create it.
Older children will be interested in the technique of modular origami, where it is necessary to create a three-dimensional figure from paper modules. The folded “triangles” are fixed together in a chain without glue, thus forming layers. You can use triangles of different colors - in this case, our choice fell on blue and white paper. Following the diagram, you can make your figurine with an original pattern on the “fur coat”.
DIY paper Santa Claus: template
When children perform DIY Santa Claus made from paper, template It can be useful. You print the template on a printer on white or colored paper, then cut out the elements along the contour with scissors. The children's task is to glue the elements to the base so that they form a picture, in our case it should be Santa with a curly beard.
Mothers always choose complex New Year's crafts: they create life-size Santa Claus and the Snow Maiden, guided by the technique of creating dolls from nylon tights, and sew for them, sometimes even embroider fur coats with beads, felt felt boots from wool, and make painted kokoshniks for the Snow Maiden.
Even the smallest children can do this craft; it is easy and interesting to do. Santa Claus made from paper turns out wonderful, you can put it under the Christmas tree, use it as a homemade decoration for a forest beauty, or just play with it. Let's make this bright and irreplaceable New Year's character together.
Paper Santa Claus will require the following materials:
- Red and white paper. Cardboard is also possible, but it is more difficult for small children to work with and requires effort when cutting and gluing;
- Moving eyes. It doesn’t matter if you don’t have them, because you can cut out white and black circles of different sizes and make the eyes yourself. Alternatively, draw;
- Scissors, glue, a simple pencil.
That's all, but if desired, Santa Claus can be decorated with various stickers, drawings, and snowflakes. I have a composter for this purpose, from which many, many graceful snowflakes have been produced.
How to make Santa Claus out of paper
Take red paper and roll it into a not very wide bag and secure it with glue. This is the easiest option for creating a cone, since you can also cut a circle out of paper, cut off a small section of it and glue it together.
Cut off the resulting tail of the bag with scissors.
You will get this long and thin cone. This is a rather tall Santa Claus made of paper - about 24 cm, if desired, it can be made smaller. For example, if it will be used as a Christmas tree decoration, the red paper needs to be cut in half.
Press the cone with your hand, just above the middle. This is necessary so that subsequently the head with a beard does not bristle, and also, when compressed, the tip of the resulting cap tilts slightly forward.
The body is ready, now let's move on to white paper. Draw a wavy long figure on it, do not forget to take into account the width of Santa Claus’s torso.
Cut out and in the upper part of the figure, which will play the role of the head and beard, draw and cut out a semi-oval. Here you also need to take into account the width of the part of the cone on which the head is attached. The trimmed area does not need to be completely cut off; it will subsequently play the role of a kind of visor.
Place the beard head on the body cone.
Cut out a red round nose and a white mustache and glue them together.
Glue on the eyes, nose and mustache and draw a smile.
That's it, the paper Santa Claus is ready, you can decorate him with snowflakes and stars. Glue the same snowflake, fluffy or paper pompom to the tip of the cap.
Our favorite holiday is approaching - New Year. We want to create a fabulous atmosphere and festive atmosphere, and creative crafts will help us with this. In this article we will look at: how to make Father Frost and Santa Claus with your own hands.
You will need: foam ball with a diameter of 6 cm, faux fur, chabrak, bias tape, holofiber, hemispheres for eyes, pattern, snowflake sequins, sewing machine, iron with sleeve block, scissors, textile glue, blue crepe satin, white, nude and fleece blue, staff wand, silver braid.
Master Class
- Cut out 2 pieces of the body from chabrak, glue on crepe satin, then finish the long sections with bias tape.
- Place the pieces of crepe satin next to each other and sew long sections with a seam over the edge.
- Form into a round shape using an iron and a sleeve block.
- Cut out the details of the fur coat and handles from blue fleece.
- Sew, turn right side out, and leave holes in the handles for stuffing.
- Cover the ball with flesh-colored fleece and create a neck by wrapping excess fabric with thread.
- Make and attach a nose, then attach hemispheres for eyes.
- Place the fur coat on the chabrak piece, insert the head into the hole in the body, then sew it on.
- Make a hat this way: cut out a rectangle to fit your head from blue fleece, sew the short side and wrap the top with thread.
- Prepare strips of fur for the lapel of the hat and the trim of the fur coat.
- Attach the blue hat with a basting stitch to the head, then sew the fur strip butt to the blue fleece and turn the fur up.
- Stuff the handles with holofiber, sew up the holes, decorate the wrists with fur and sew on the hands.
- Make a beard this way: cut out several rectangles of flesh-colored fleece with a difference in length of 1.5 cm. It is worth noting that the rectangles need to be cut so that the fleece stretches along the long side of the rectangle. Cut the fringe.
- Sew the beard pieces to the head, starting with long pieces and gradually working your way up to the nose.
- Stretch and curl your beard into curls.
- Decorate your fur coat by attaching snowflake sequins.
- Wrap silver braid around the stick to make a staff.
Gorgeous Santa Claus is ready!
You will need: red napkin, template, marker, glue, scissors, paper, printer, hole punch, twine.
Master Class
Santa Claus from a napkin is ready!
You will need: cotton wool, ice cream sticks, red felt, decorative eyes, red pompom, glue gun, flesh-colored paint, brush, scissors.
Master Class
Santa Claus made from cotton wool is ready!
You will need: felt 1 mm thick in beige, white and black, white felt 3 mm thick, thick beige cotton fabric, white felting wool, padding polyester, wire, template, black beads for eyes, black and beige threads, scissors, pencil, glue gun, small bell and other decorations.
Master Class
- Print the template.
- Cut out the body of Santa Claus and transfer it to thick white felt.
- Cut out the body of Santa Claus from felt.
- Cut out the same body part, only from thin white felt.
- Cut the boots from thick white felt, then the same boots from thin black felt.
- Cut out the boot cuffs from thin white felt.
- Draw the mittens and cut them out of thick white felt.
- Cut out parts from thin beige felt - the trim of the fur coat and hat.
- Cut 2 circles according to the template from beige cotton fabric.
- Make a spout from a small circle: pull the thread, stuff it with padding polyester and sew the spout to the large circle.
- Sew black beads for eyes.
- Sew the face to the body from thin felt. It is worth noting that during sewing you need to add a little padding polyester for volume.
- Make the eyebrows and beard from felting wool, then attach with a glue gun.
- Glue the trim of the hat and fur coat.
- Prepare 4 pieces of wire, twist them onto a pencil, giving them the shape as in the photo.
- Glue the parts of Frost's body from thin and dense felt, gluing wire between them in place of the arms and legs.
- Glue the mittens and boots to the twisted pieces of wire.
- Twist a wire holder for a bell and glue it to the mitten.
- Stitch the Santa Claus figurine with beige thread.
You will need: bottle of champagne, hook, yarn, centimeter, edge, filler, regular threads, needle, doll strands, glue, decorations.
Master Class
- Knit the head with single crochets using beige yarn, according to the principle of knitting a ball. It is worth noting that the number of rows without increases and decreases should be two rows less than for the ball.
- Make the base of the doll from red yarn: double crochet a circle, fold it in half and make knots at a distance, as shown in the photo.
- Knit your arms and torso in circular rows that taper towards the bottom.
- Tie the nozzle onto the bottle from beige yarn and don’t forget to constantly try it on so that it doesn’t fit too tightly.
- Connect the bottom of the nozzle and the workpiece with your hands on the bottle.
- Fill the handles of the red blank and the empty space with filler.
- Dimensions: head circumference 30 cm; arm length 18 cm; body width 30 cm; body height 16 cm.
- Knit and decorate clothes.
- Clothes dimensions: hat blank diameter 10 cm; sleeve length 12 cm; fur coat length 28 cm; sleeve volume 18 cm; fur coat volume 47 cm; The circumference of the finished hat is 32 cm.
- Sew the clothes with regular threads, the sewing lines are indicated in the photo.
- Attach the doll strands to the yarn and secure with glue. Make a beard from long strands, and use shorter strands for your hairstyle.
- Glue the hat to your head.
You will need: red cardboard, flesh-colored paper, 2 openwork napkins, scissors, marker, pencil, glue.
Master Class
Santa Claus from an openwork napkin is ready!
You will need: bright and flesh-colored cotton fabric, white and red fleece, felt, padding polyester or holofiber, combed tape (wool for felting), foam rubber, felting needle, thick and thin wire, glue gun, Moment-Crystal glue, thick cardboard, acrylic paints and brushes, wire cutters, pliers, stationery knife, buttons, beads, beads, floss.
Master Class
- Make a pattern from cardboard: cone with sides 13 cm; circle with a diameter of 6 cm and handles (optional).
- Draw a line through the center of the circle and divide it into 3 equal segments, then make holes for the wire at their joints.
- Place a padding polyester circle and a slightly larger diameter cotton circle on the cardboard circle, then pull the fabric around the cardboard using thread and a needle as shown in the image.
- Bend a thick wire into the letter P, then insert it through the holes in the cardboard, padding polyester and fabric.
- Bend the ends of the wire so that you get feet.
- Prepare a piece of thin wire 25 cm long and screw it to a thick wire, then glue it with hot glue. At this stage, make sure that the structure is stable.
- Prepare 2 pieces of cotton fabric 22 cm long and 4 cm wide. Fold in half lengthwise, sew, turn out, pull over the legs and sew with a blind seam to the bottom.
- Make a cone pattern from flesh-colored fabric, fold it in half, sew, leaving 2 mm of the tops unsewn, fold the edge around the circumference, baste and turn the cone out.
- Place the cone on a thin wire, leading its end through the hole in the top. Stuff the cone with holofiber so that the wire is in the center of the body, then sew the folded edge to the body around the circumference with a blind seam.
- Cut out large feet from cardboard, then hot glue them to the wire feet.
- Cut the boots out of foam and make a recess in the back for the ankle wire, then attach them.
- Cut 2 ovals from red fleece, cut a triangle at the top, cover the foam boots, sew the heel with a blind stitch and pull the fleece around the cardboard sole.
- Cut 2 felt ovals slightly larger than the cardboard sole, hot glue them to the sole, trim off the excess and sew the felt to the fleece with a blind stitch.
- Mark the lines for the top of the jacket and the bottom of the cap on the cone, then roll a padding polyester ball, cut a circle from the fabric, pull it along the edge and sew the nose in place.
- Draw a face to your liking.
- Cut the red fleece jacket into a truncated cone shape, fold it in half, sew along the edge, then turn it inside out.
- Sew handles and gloves from red fleece and cotton fabric as shown in the image.
- Pull the jacket over the body-cone and sew at the bottom and along the neck with a hidden seam.
- Cut out figures from felt - Christmas trees, houses, then glue them with Crystal glue and only then sew them on as desired.
- Sew a white fleece snowdrift ribbon with a hidden seam and decorate the composition with beads and buttons.
- Cut boot cuffs and cuffs from white fleece, fold in half, sew along the edges, stretch over the arms and legs, then hand sew. Make a wavy collar in the same way.
- Sew the arms to the body using a button fastening: pull the thread a little, tie a knot and glue it with Moment.
- Tear 10 cm of wool from the combed strip, gather it into a bun and felt the beard with a felting needle.
- Tear off a bunch 2 times thinner and 2 times longer, then roll it in place of the mustache.
- Tear off 2 more bunches as for the beard, then roll on both sides of the face.
- Felt the hair on the sides and back of the head in the same way.
- Cut out an elongated and narrowed cap from cotton fabric based on half a cone, sew it together, leaving a hole at the top.
- Turn it inside out and put the cap on, bringing the wire through the hole and sew it along the edge to the head. Bend the end of the wire into a loop.
- Make a pom pom and flap out of white fleece, then sew them on.
- Make a small felt Christmas tree and glue it to the hat as a decoration.
You will need: red and white colored paper, scissors, glue, marker, pencil, wooden bead.
Master Class
Santa Claus from a plate
You will need: paper plate, colored paper, scissors, glue, marker, printer, eyes, hole punch, rope.
Master Class
You will need: box, colored paper, scissors, glue, marker, pencil, button, eraser, envelope.
Master Class
You will need: plastic bottle, paints, colored paper, pompom, scissors, buttons, 2 bushings, glue, cotton wool, white and black lace.
Master Class
Santa Claus from a bottle is ready!
You will need: white and red paper, scissors, template, printer, pencils or markers.
Master Class
Creative grandpa is ready!
You will need: cotton pads, plastic spoon, glue, red yarn, buttons for eyes, ribbon or thread for hanging, red felt-tip pen, scissors.
Master Class
- Take a cotton pad.
- Fold its side into the center.
- Make cuts along the edge of the circle.
- Draw a smile with a felt-tip pen.
- Take a plastic spoon.
- Apply glue to the spoon, leaving the tip without glue.
- Wind the yarn tightly.
- Apply glue on both sides to the tip of the spoon and glue the face of Santa Claus to the convex part.
- Glue a clean cotton pad onto the concave part of the spoon.
- Cut a circle out of a cotton pad and glue it onto the tip of the spoon handle.
- Cut a circle from a cotton pad, color it with a felt-tip pen and glue it as a nose.
The New Year is approaching, and the pre-holiday bustle grips us more and more every day. Adults are already looking at potential gifts for their loved ones and writing menus, children are looking forward to surprises. To brighten up your child’s tedious days of waiting, you can entice him with crafts. For example, you can invite him to make Santa Claus out of paper.
There can be a lot of options - here you need to start from the age, skills and interests of your child. The main thing is that all participants enjoy the process and results. Ready-made Santa Clauses can be hung on the Christmas tree, placed under it, or given to grandparents. So let's get started.
Santa Claus made of paper - cone
Perhaps the simplest craft, it can be done with children 2-3 years old.
For this we will need:
- red cardboard;
- pink face paper;
- cotton wool for beard and clothes;
- White paper;
- glue, scissors;
- markers.
Another option is to prepare a beard from a piece of paper: make narrow strips, cut fringes from them and twist them using a blade (just run it over the strips so that they curl). We glue strips in several tiers to make the beard full. We glue one strip onto the “hat”. This toy can be hung on a Christmas tree - it will be very elegant.
Santa Claus made of paper - origami
With older children, we make Santa Claus with our own hands using the origami technique - it’s a little more complicated, but under your guidance everything will turn out perfect. This craft can be hung on a Christmas tree, or you can make a garland, for which you will need several of these toys.
Here is a simple master class on making Santa Claus. We will need colored paper. You don’t have to focus on the color red, but make a bright multi-colored garland.
 |
 |
Options for Santa Claus crafts made from paper
This craft can be used as a Christmas tree decoration, or as a postcard, with which you can indicate whose gift is by attaching it to gift boxes and signing on the back.
But your children will definitely like this cute old man. Moreover, making it is very, well, very simple.
A slightly more complicated option is to make Santa Claus using the quilling technique. It will require a lot of stripes of white and red. This craft belongs to volumetric quilling, although it contains some simple elements, such as gloves, which are simple curls.
 |
 |
Whichever option you choose, your child will be happy and have a hand-made Santa Claus Christmas tree or give it to someone very loved and dear.
From scrap materials
Since this is a “personal” wizard, we will make it from everything that is at hand, namely: from a can of tomato paste, foam plastic, plasticine, scraps of fabric and padding polyester, sushi sticks, “yolks” from Kinder surprises . You will also need thread and a needle, scissors, a line corrector, and red nail polish.
We make boots from the “yolks” from Kinder surprises.
We make a body and legs from a can, foam plastic, and plasticine.
We cover the body with padding polyester.
We make “skin” from beige knitwear.
We paint the legs with concealer.
We sew pants.
We try on a mustache and beard from padding polyester and make a nose.
Sew it on.
We cover the boots with fabric.
We insert the legs into the boots.
We cut out the handles.
We sew on the button eyes and put the cap on the head.
And for our wizard to become truly magical, we’ll put a bag on his shoulder. You can put sweets in it.
Every morning the child will take out a new surprise from it.
How to sew Santa Claus
Santa Claus made of cardboard and colored paper
The basis of the future Santa Claus is cardboard. You can use a toilet paper roll - then Santa Claus will turn out to be small, or a paper towel base - then you can make him tall. Or you can make a base from any cardboard of the desired size by rolling it up.
What you will need:
- cardboard;
- red paper;
- White paper;
- cotton pads;
- buttons;
- glue;
- scissors.
Lubricate the selected cardboard base with glue.
Wrap it in colored paper, leaving space for the face.
Then cut out a beard from a cotton pad.
Glue it to the right place.
We are preparing a hat for Santa Claus. We make a cone out of red paper, securing the ends with glue.
Decorate the cap with the remains of the cotton pad. Glue cotton wool onto the tip of the cap and along its edge.
We grease the inner edge of the cap with glue so that it holds tightly, and we dress it for Santa Claus.
We cut out two mittens from white paper and glue them to the sides.
We draw the face with colored pencils or paints. Then glue the cotton mustache.
We decorate the front of Santa Claus's fur coat with buttons. They can be glued or placed on plasticine. This is such a cute Grandfather Frost!
For the next craft we need red napkins.
You can take any image of Santa Claus, as long as it is the right size.
Or you can download and print our version presented below in A4 format. There are three different sizes, you can choose according to the size of the napkins.
Print out the required quantity.
Cut it out.
Take red napkins.
Fold the napkin as shown in the photo.
We make a cut where Santa Claus's hat is, and insert a corner of the napkin. Roll a small ball out of cotton wool and decorate the hat.
Ours is ready! You can use it to steal a festive table and surprise your dear guests.
Santa Claus from nylon
DIY Santa Claus from a shell
This craft is very simple, but original. It can be made together with children, then used as decoration or as a New Year's gift to friends and family.
Let's take the shell.
Cover with white acrylic paint.
The eyes are made of black wool, the nose is made of cotton wool.
We decorate the hat with a bead. We attach all elements using hot glue. Our craft is ready!
DIY Santa Claus
Napkin with Santa Claus
In this master class I will show you how to knit a napkin with an image of Santa Claus.
To knit a stand in the form of a Christmas tree toy, we will need any medium-thick yarn of any dark color (otherwise the applique will blend in with the background color), hook No. 1, white denim yarn, pieces of adhesive-based felt, a decorative bow, two beads, scissors .
We collect 4 air loops from blue yarn and close them into a ring with a connecting loop.
We knit the first row with single crochet stitches, inserting the tool into the hole of the ring. The number of stitches does not matter, the main thing is that the knitting does not bend. We also close the row with a connecting loop.
We also knit the next rows with single crochets. To prevent the knitting from curling at the edges, it is necessary to periodically make additions. We make additions in each row, but their number will vary depending on the numbering of the row. For example, in the second row we make 3-4 additions, in the third – 4-5 and so on. The number of increases may vary depending on the yarn, so the main thing is to ensure that the knitting does not curl and the increases are at an equal distance from each other.
The total number of rows for the base is 5-6. You can make more if you want the diameter of the stand to be larger.
In the next row, use a thread or a yellow marker to mark 4 points that are equidistant from each other. In this row we also knit single crochets, but at the points marked for us we knit three single crochets in one loop.
We knit the third row in the same way as the second.
After this we will tie the edge of the stand. To do this, we attach white yarn to the edge of the circle and knit the following pattern: 3 chain loops for lifting, 1 double crochet in the same loop, 3 chain loops, “picot” from these three chain loops, 2 double crochets in the same loop.
We repeat the pattern to the end of the row, only instead of 3 chain loops we knit a double crochet.
After this, we knit single crochets in the same way as we did when knitting the warp.
Cut out a “bucket” and a “carrot” from pieces of felt with adhesive backing.
We form eyes from beads, sew all the details and glue them to the base so that we get a snowman.
Our napkin is ready!
How to crochet a Santa Claus applique
What is New Year without the main wizard? Santa Claus is an obligatory guest in every home. Therefore, today we will crochet an applique in the form of Santa Claus!
For knitting we need:
- red, white and peach yarn;
- hook;
- scissors;
- black polymer clay or 2 black beads.
Let's start knitting with an amigurumi ring of 6 loops. To do this, we need to knit 2 ch and in the 2nd of them, from the hook, make 6 sc.. At the beginning of a new row, we form 2 lifting loops, since we will then knit dc.. Then in the next 3 loops we knit 3 dc..
At this stage, change the color of the thread to peach or beige, pink. We do not cut the white thread, but simply lay it behind the loops. And in the remaining 3 loops we knit 3 dc.
We knit 1 ss into the 2nd lifting loop. Change the thread again to a white one and do not cut the peach thread. We knit 2 dc only in white loops.
In the new row we make 1 ch and unfold the knitting. Now we perform 1 sc in each loop along the peach loops. Now change the thread to red. We cut the white thread.
Then we unroll the knitting and make 2 stitches. Next we will knit like this: skip 1 loop and knit 1 dc to the last loop. We don’t knit it, but skip it. Turn around and make 2 ch, then knit 1 decrease and knit to the end, don’t knit the last stitch, turn around and make 1 stitch.
We knit a beard. To do this, use a white thread to join the white loops in the corner. Cast on 3 sts, then knit 4 dc into the same loop. In the next loop we perform 1 sc. We skip the loop and knit 5 dc in a new loop. Next 2 sc, then skip the loop and again perform 5 dc. We knit like this until the end of the row.
We join the cap with a red thread and tie the edges of the sc. You can add a lurex thread to the main yarn. The cap will shine around the edges.
Now we join the top of the hat with white yarn. We form 3 points. Next we knit 7 unknitted dcs. And now we grab the thread and knit only 2 loops from the hook. Then we grab the thread again and also knit only 2 loops. We knit 2 loops at a time until everything is knitted. This is a pompom.
Now let's make the mustache. We collect a chain of 5 ch. Then we knit 1 sbn, 1sbn, 1 hdc, in the last we knit 1 sbn and 1 ssn. And again ch 6 and repeat the action.
We sew on the antennae and sculpt eyes from polymer clay. You can take 2 small beads. Or you can embroider the eyes with black yarn.
