Winter is full of holidays, unexpected events and some free time. The time we use to repair, sew, knit or remake something. And now is the time to start sewing clothes for the spring-summer season. In order to please yourself with a new beautiful thing, you don’t have to be a professional seamstress. You just need to choose the model you like and a beautiful fabric. Today we are sharing with you a selection of simple blouse and t-shirt patterns that even a beginner can handle. And in just one evening, a stylish and fashionable new thing will be ready! Look and choose!

Simple blouse patterns for beginners

Below is a pattern - not a model, a drawing that needs to be transferred to paper. Here for size 40.

Below in the photo is a drawing diagram for knitwear. You can sew a new blouse from two old T-shirts or from leftover fabric. Another plus: the neckline can be made the way you like. For a T-shirt, a one-piece sleeve will look much better than a set-in sleeve because it “fits” better and does not widen the shoulders.

A comfortable T-shirt with full sleeves that many women like. The choice of fabric can result in both an elegant and casual option.

Interesting blouse in peasant style. For a full figure, you need to make it a short version, to the bone on the hip, for example. Well, pair it with trousers or a pencil skirt.

Oversized T-shirt with full sleeves: stylish and simple! The main features of the outfit are the boat neckline and the length.

T-shirt. If you think about it, it will suit everyone: because it can hide flaws and highlight the advantages of a figure. Sewn from knitwear.

Interesting blouse pattern. Sewn from one piece of fabric. This version of the blouse will be at the peak of popularity for a long time. You can find out in more detail how to sew such a blouse.

Fashionable oversized blouse model

Light fabric blouse

These blouse designs are perfect for a full figure. Original loose cut and nothing extra!

Simple blouse patterns for beginners

Voluminous sleeves with ruffles are still in fashion

A T-shirt with pleats will hide your protruding tummy.

A few more simple blouse patterns with interesting cuts for beginners

And finally, we present to you a pattern of a chic blouse that will look perfect on any figure.

As you can see, you can see less and less tight blouses and T-shirts on fashionistas. Currently, Oversize rules the roost - larger size models or loose-fitting clothes, which is very pleasing! After all, such models provide comfort and freedom of movement, and perfectly hide figure flaws.

The easiest way is to build a pattern according to the diagram, since you can take a rectangle of the required length and width as a basis. When modeling a pattern, to make your task easier, you can use your own T-shirt or jacket that fits. Go for it and you will succeed! We hope these easy blouse patterns for beginners have inspired your creativity!

Beautiful and original clothes, which took very little time to create, will bring you a lot of pleasure and allow you to be deservedly proud of your skills. Why waste effort on creating a pattern and developing parts? We offer you simple and effective recommendations, following which you will turn a piece of fabric into a work of sewing art in a couple of minutes.

Seamless blouse without pattern

Summer blouses created without a single seam are becoming extremely popular. They drape interestingly and fit the figure, are simple to perform and anyone can do them. It is advisable to choose a light fabric for them, such as chiffon, and also select suitable accessories - beads, belts, ribbons - to complete your look. The piece of fabric can be square, rectangular or even asymmetrical - depending on what shape you want the bottom edge to have in the end. Fold the fabric in half so that the free edges remain on the sides of the figure. On the fold line, exactly in the center, cut out the neck of any shape. All that remains is to trim the edges of the fabric with piping - and the blouse is ready to become part of your wardrobe. Using a similar pattern, a circle skirt is created without seams.

Square cape blouse without pattern

A slightly improved version of the previous point is a pareo or cardigan made from a square of fabric. We also fold the material in half, cut out the neckline, and from it in the center of the chest there is a place for fasteners or ribbons. The “sides” are sewn together, all free edges are overcast. If desired, you can add a hood or patch pockets to the product, also cut from a whole square of fabric.

Romantic blouse with ruffle neck without pattern

For ladies with standard clothing sizes from 42 to 48, you will need 1 meter 10 cm of fabric for a blouse in length and 1 meter 50 cm in width. Fold this rectangle in half and cut it. We set aside 15 centimeters from the top so that we can assemble the neck afterwards. From the armhole in the same way - 30 cm each. We process the edges of the fabric, including the hem and neckline (the latter having been previously tucked). To add some “zest” to the blouse model, measure 5 cm from the top of the neckline and fold the fabric along its width. We stitch it, then insert an elastic band about 35 cm long, which will effectively gather the ruffles around the neck.

Simple “peasant woman” blouse with lace without a pattern

To sew such a blouse you will need cotton fabric, lace and braid. From the fabric we cut out 2 rectangles with sides 110 by 80 cm and sew them on the sides, simultaneously finishing the edges with an overlocker. Along the bottom edge we set aside 25 cm from each side, and from them up another 45 cm. We cut the longitudinal lines. This way we get shelves and sleeves at the same time. We process the seams and connect the sides. Now we turn up the edge of the neckline by 10 cm and stitch it twice to make room for the drawstring. The edges of the sleeves and the bottom of the product are decorated with lace or braid. The belt can be tightened with a belt worn over the top.

Representatives of the fair half of humanity take care of themselves in order to always look perfect and beautiful. The image truly becomes feminine thanks to clothing. There's something in every woman's wardrobe! We suggest trying to sew blouses with your own hands quickly and easily. Their patterns are varied - from simple to designer models.

A piggy bank of creative ideas

If you like to create masterpieces in your free time from work and household chores, then you simply need to update your wardrobe. How about a DIY chiffon blouse? You can even come up with patterns yourself, the main thing is to first take all the measurements and calculate the amount of fabric. Chiffon is a lightweight material. In such a blouse you will always look like a soaring, loose bird with a sophisticated silhouette.

Choose a pattern according to your body type. For example, blouses with peplum are suitable for girls with rounded hips. But women with a pear body type need long, straight-cut shirts. And if you also have your spouse’s shirts lying around in your closet, which he no longer wears, then this is an excellent springboard for creativity. Remaking is sometimes easier than creating something from scratch.

Before we start creating an elegant piece, let's learn a few useful tips:

  • First we transfer the pattern to the wrong side of the fabric;
  • to draw a pattern on the fabric, you can use bar soap or chalk;
  • Be sure to make seam allowances of approximately 10 mm;
  • All seams are first basted, and only then machine stitched;
  • blouses created with your own hands can be decorated with buttons and embroidery, brooches, beads, rhinestones;
  • if you wear a belt or a wide belt, the blouse will immediately change and look new.

Let's give the shirt a second life

Remember the movie "The Diamond Arm"? The hero Andrei Mironov's trousers turned into elegant shorts. And we will make beautiful, fashionable, stylish and, most importantly, exclusive blouses from men’s shirts with our own hands. The models of men's shirts are mostly straight, and we need to sew a fitted and cropped blouse.

Necessary materials:

  • men's shirt;
  • threads;
  • needle;
  • sewing machine;
  • ruler;
  • measuring tape;
  • scissors.


New blouse - well forgotten old one

There is nothing more pleasant for a woman than to lose weight, and then put on her old thing and happily realize that it is too big. But what if this shirt was your favorite thing? It's easy to transform. Of course, you can look for blouse patterns for beginners. Simple DIY patterns will help you create an exclusive item. And if you are not comfortable with a sewing machine and cannot sew a shirt yourself using a pattern from a piece of fabric, it is better for you to work some magic on an old thing.

Necessary materials:

  • shirt;
  • threads;
  • thin elastic band;
  • pencil or chalk;
  • ruler;
  • sewing machine.

Step-by-step description of the creative process:


A blouse is a truly feminine clothing model that should become one of the important parts in the wardrobe of a modern stylish woman. Due to its versatility, it suits different fashion trends and combines with many styles. Many models - classic, with a peplum, in the bat style with dropped sleeves, with a swing collar and many others - will allow each girl to choose the appropriate model and sew it with her own hands, based on her capabilities and desires.

Basic pattern for a sleeveless blouse: step-by-step instructions

Knowing how to construct a basic pattern for cutting fabric for a blouse will open the way to sewing more complex models with sleeves and various additional decorative elements. Before starting to build a pattern, you need to measure the following parameters (the numbers are given for example and clarity when constructing a drawing step by step):

  • Back (length to waist, cm) – 40.
  • Shoulder (length, cm) – 15.
  • Neck (semicircle (Neck), cm) – 20.
  • Area above the chest (semicircle (PO above the chest), cm) – 46.
  • Chest (semicircle (chest), cm) –50.
  • Hips (semicircle (hip), cm) –52.

By using your own parameters, and not the average values ​​​​for a certain clothing size, you can be sure that the blouse will fit exactly to your figure.

Preparatory stage - grid

Draw a rectangle MNPK (for convenience, designate the letters from the upper left corner clockwise) with the following sides:

  1. Sides MN and KP are equal to the sum of PO chest and 5 cm, regardless of size. For example, with 50 cm specified in the parameters, the length of the sides will be 55 cm. This is the width of the future blouse.
  2. The MK and NP sides are the sum of the length of the back to the waist and 18 cm, regardless of size. For example, with 40 cm specified in the parameters, the length of the sides will be 58 cm.
  3. Let's determine the depth of the armhole - it will be the sum of one third of the chest parameter and 4 cm. So, with the figure indicated above, the size of the armhole will be 21 cm. To construct it, measure the calculated distance from the end M along the segment MK and name the resulting point G. From it draw a segment parallel to MN to the point of intersection with side NP and designate, for example, G1.
  4. Let's determine the waist level. To do this, you need to measure the length of the back from the end M (in the parameters for the example it is 4 cm) along the side MK and name the resulting point B. From it, draw a parallel segment MN to the point of intersection with the side NP and designate, for convenience, B1.

Constructing a blouse back pattern

  1. From point G, measure a segment to the right equal to the sum of one third of the chest semicircle and 3 cm. In this case, the segment will be equal to 20 cm. Mark the end of the segment with point G2, from which then draw a straight line upward parallel to side MK until it intersects with the upper base MN, name the place intersections with the letter O. This is the width of the back of the blouse.
  2. From point G2, measure to the right a segment equal to one-fourth of the chest - for this pattern it will be equal to 13 cm. The end of the segment is point G3, and the segment itself shows the width of the armhole of the blouse.
  3. From point G1, measure upward a segment parallel to side MK, which is made up of one half of the chest and 0.5 cm - according to the standard measurements taken, it is equal to 25.5 cm. The end of the segment is point W.
  4. From point G3, measure upward the same segment 25.5 cm long, the end of which is point O1, and call the point of intersection with segment MN the letter O2. Combine points O1 and W.

Thus, the rise of the front of the blouse is built:

  1. Find the middle of the segment G2-G3, designate the found place as G4. From it, lower a perpendicular to the segment KP, designate the point of intersection of the perpendicular with this segment as R, and with the segment BB1 as B2. This is how the side line of the blouse appeared.
  2. By dividing the segments O-G2 and O2-G3 into 4 identical segments, additional marks are obtained for constructing straight shoulder girdles and armholes.
  3. Extend the sections O-G2 and O2-G3 1 cm downwards, bringing the resulting ends together - this is the designation of the descent of the armhole of the blouse.

Back neckline markings:

  1. From point M, measure a segment to the right equal to the sum of one third of the semicircle of the neck and 0.5 cm. For this model, it will be equal to 6.5 cm. From it, measure up 1.5 cm, and from it another 1. Combine the found point with the point M is a smooth line with a bend.
  2. Measure from point O 2 cm down - this will be the level of the slope of the shoulder of the blouse, along which the line of the shoulder bevel will then be constructed.
  3. From the point 1.5 cm, measured earlier when constructing the neckline, through point 2, indicated when marking the slope of the shoulder, draw a segment that is the sum of the length of the shoulder (point 14) and another 1 cm (taken into account for the correct fit). The result is a shoulder cut line.
  4. Measure from point 1, dividing the angle into two equal parts, 3 cm. Through point 14, the middle of the segment O-G2, points 3 and G4, draw a straight line for the armhole.
  5. From point 2, measure 2 cm to the left. Through points G4, 2 and H, draw a segment that makes up the side seam line.

Front pattern drawing

It is built according to the following scheme:

  1. Measure from point W to the left a segment equal to one third of the neck + 0.5 cm. Designate its end as W1. According to the example, the length is 7.5 cm.
  2. Measure from the end W down a segment equal to one third of the neck + 1.5 cm. In this case, the resulting segment is 8.5 cm.
  3. Connect the found points W and 8.5 cm with a dotted line, find its middle and draw a 7.5 cm segment from point W through the center of the segment.
  4. Connect points W, 7.5 and 8.5 with a smooth line with a bend. The result is a neckline cutout
  5. From the end of W1, measure 4 cm to the left, then another 1 cm down. Combine ends W1 and 1. From point G1, measure a segment equal to the neckline + shoulder length from the neckline to the chest dart - 1 cm. According to the measurements for the sample, the resulting segment is 11.5 cm. Combine its end with point 1. The resulting shoulder length is from cutout of the opening to the chest dart.
  6. At the right segment of the dart line (from 1 to 11.5), find the center and measure to the left a segment equal to the difference between the chest line and the line above the bust. According to the sample, it turned out to be 4 cm. From point 11.5 through point 4, draw a segment equal to the right line of the dart, and mark its end with point O3.
  7. Combine points O3 and the middle of the segment O-G2 with a dotted stroke. From end O3, measure with a dotted line a segment equal to the difference in shoulder length and 4 cm (the length of the shoulder from the neckline to the chest dart). The segment is 11 cm. Next, you need to combine its edge with the middle of the segment O2-G3 with a dotted line. Then measure 2 cm down from point 11 and combine with O3. This is the length of the shoulder from the chest dart to the armhole of the blouse.
  8. For the dotted segment drawn from point 2 to the lower end of the internal division of the segment O2-G3, find the middle and measure 1 cm to the right from it. Measure 2 cm from this point, dividing the angle into two equal parts. Draw through points 2 and 1, the lower dividing point of the segment O2-G3, point 0.02 and G4 a segment that will be the armhole line of the blouse.
  9. From end B2 measure 2 cm to the right. Draw a segment through points G4, 2 and R, which will be the side seam.
  10. From end B1, measure 2 cm down and connect to point 2 from the side segment - this is how the waist level is formed.
  11. From end P, extend segment NP by 2 cm and call the resulting end R1. Connect R and R1 - the hip level is formed.
  12. From the end 8.5, designated when constructing the neck, and point R1, measure 1.5 cm to the right and combine the calculated points. Extending it 1 cm up, combine it with point 8.5. Add 3 cm to the fastener. The length from the waist to the bottom is taken from 12 to 18 cm, depending on preference.

Modeling a blouse with a peplum

The peplum is a beautiful piece of clothing that adds femininity to any look. Most often it is found on different models of dresses or on skirts, but it is also suitable for embedding into a blouse - it turns out both modest and elegant.

In order to make your own blouse pattern, which includes a peplum with flounces, it does not require much effort - even novice seamstresses are capable of this. Modeling takes place on the basis of the dress.

It is necessary to take into account several features, the main one of which is that the beginning of the peplum is the waist line. In this case, she will not unfavorably change the visual proportions of the figure.

There are only three important points when building a peplum:

  • The first is that the waist dart is closed.
  • Second, the flounces should be the same in width and turned towards the location of the side seam.
  • Third - on both halves of the pattern, you need to construct voluminous seams, with relief, since all parts of the dart, chest and waist, will be hidden in them.

These are all the main points that will help you sew a blouse with such an elegant element as a peplum with frills without any extra effort.

A master class on sewing a blouse is in the next video.

How to model a summer chiffon model?

Chiffon is an ideal material for summer clothing. Thin soft fabric adds femininity, elegance, and airiness to any look. A chiffon blouse will become an indispensable wardrobe item thanks to the combination of lightness of the fabric and classic cut and is suitable for both an evening walk and office work.

This drawing includes several decorative elements in the classic cut of the blouse:

  • Wide cuffs with turn-ups.
  • Stand collar.
  • Folds located on the neck and shoulders.
  • Very wide armholes.

They will unobtrusively decorate a strict silhouette and make it more suitable for girls and young women.

Drawing up a diagram step by step:

  1. On the base pattern of the blouse, remove the darts at the waist, leaving the length of the front part only to the hip line.
  2. From the middle of the neckline, measure 12 cm down. Draw a strip 3 cm wide, cut and sew it separately in four parts.
  3. Mark a shoulder line different from the primary construction. To do this, measure 2 cm from the shoulder to the right. From the side of the blouse, measure 2 cm to the left, then up another 7 cm, draw a smooth straight line with a bend along the pattern.
  4. New cut line for the sleeve at the connection between the shoulder point and the side point of the blouse. In addition to it, you need to draw a cuff 8 cm wide (after stitching it will be half the size). Cut it off and seal it separately.
  5. The bottom yoke will also be double, so you need to cut it 14 cm wide, and in length it will be equal to the size of your hips.
  6. Redraw the entire back pattern, excluding the neckline - it needs to be drawn differently and an additional drawing for the stand-up collar must be drawn up.

Construction of a stand-up collar:

  1. Construct a rectangle ABCD=EFGH, the sides of which EF and GH are equal to the neckline, and the sides EH and FG are 4 cm each.
  2. Measure from point G and point F 0.5-1 cm upward. From the midpoints of sides EF and GH, draw equal straight lines for the collar, respectively.
  3. Thermal fabric will help strengthen the inside of the collar.

Stitching (steps):

  1. The side seams are swept up to the armholes.
  2. Sew the bottom of the blouse 4 mm, then pull it together until it matches the line of the yoke, evenly placing the folds.
  3. Make the lower yoke stronger using thin thermal fabric, fold it with the blouse with the front parts together, baste, then stitch. Next, fold the yoke in half with the right side facing out, iron it, turn over the open edge and make a stitch.
  4. Baste the parts of the planks sealed with thermal fabric to the front halves and stitch them. Place paired parts (pre-compacted) of the strips on the blouse strips with the front parts facing each other and also stitch them.
  5. Turn the planks right side up, sweep them, fold them along the edges, baste them again and sew a stitch at the edge along the outer sides.
  6. Make folds on both halves of the blouse. Baste the shoulder seams, then stitch.
  7. Sew the cuffs along the openings for the arms, fold them inside out along the finished fold line so that they go around the armhole on both sides. Turn over the remaining edge and stitch.
  8. Turn the cuffs towards the shoulder seams, lightly fasten and press.
  9. Treat parts of the collar with thermal fabric.
  10. Sew four loops for the collar, basting them to the right outer side.
  11. Sew a stand-up collar and topstitch in three lines.
  12. Sew the loops and sew on the buttons.

photos

Model with wrap

A wrap blouse will look good with both skirts and jeans and is suitable for wearing in different life situations. Typically, this model is sewn with long sleeves, since the neckline is deep enough, and in this case there is no need to expose additional parts of the body.

The cuffs on the sleeves add a discreet and neat style.

The main element of this model is the smell.. It must be sewn with a fastener, since in itself it is not designed to maintain a closed shape and can swing open at any time, which is a feature of its structure. The long back makes the blouse look like a classic shirt, and there is an elastic seam at the front that allows the fabric to hang freely.

By adding a few necessary elements to a regular pattern, you can get an extraordinary and multifunctional item that fits any element of a woman’s wardrobe.

See below for a master class on sewing a wrap blouse.

We easily and quickly cut out “Carmen” with our own hands

It is no coincidence that the Carmen style is named after a Spanish woman. This name refers us to Spain, namely to its flamenco dance style, in which the upper part of the clothing was made with a neckline that exposed the shoulders and was decorated with many frills. It has passed into everyday life today.

A blouse with such a collar is sewn very easily and quickly and is suitable even for beginners, however, despite the simplicity of the cut, it looks very impressive.

Sewing is done as follows:

  • Place the facing of the cut and the front part with the front sides facing each other, pin along the line of the future cut and stitch next to the three marked sides. Cut both parts between the lines. Turn the facing inside out and iron the cuts along the edges. Then bend the facing by 0.75 cm and baste. Sew the front part at the slits along the edges.

  • Make seams on the sides + for the sleeves. Sew short slits along the ruffles of both sleeves.

  • Using a frequent narrow zigzag stitch, sew the lower edges along the sleeve ruffles. Iron the cut allowance to the wrong side, sew along the fold line with a small tight zigzag, and cut off the excess allowance from the wrong side.

  • Gather the frills from the top edge of the sleeves to the bottom, and stitch to the bottom edges.

  • Sew the sleeves into the armholes. Overcast seam allowances and press.

  • Overcast the neckline with a tight, narrow zigzag. Iron the allowance on it inside out, lay a small tight zigzag stitch along the front side, cut off the excess allowance from the wrong side.

  • Iron the seam allowances on the drawstring strip inside out, along the short and longitudinal edges. Pin the strip from the wrong side, aligning all the edges, stitch according to the markings.

Turn out the ties to 0.5 cm and thread them into the drawstring.

  • Fold in the hem allowance and stitch 1.5 cm from the edge.

Blouse patterns with dropped sleeves and bat

Bat-style items with loose dropped sleeves fit freely and do not restrict movement. Such models, thanks to the soft curves of the fabric, make the image more feminine and delicate. They give a special emphasis to the hands of girls. The loose fit is suitable for any body type and will be appreciated by both thin and larger women.

Sewing such a model is also not difficult, but simplicity does not mean a lack of style here; rather, on the contrary, style is in simplicity.

Sewing items:

  • Knitted fabric 1.5 m wide and a length that includes the length of the front and back of the blouse, and another 40 cm for the hem, waistband, and cuffs.
  • The cuffs are sewn from rectangles with sides of 14 cm and a wrist circumference length of + 6 cm for seam allowance.
  • Pattern-base

The length of the belt is sewn depending on the volume of the hips - up to 100 cm is 1.5 m, for 100 cm or a little more it is 1.7 m. Its height, like the cuffs, is 14 cm. It is necessary to add to the pattern allowance and hem.

When choosing fabric for sewing, you should think about what season a particular model is being made for.

In summer, models made of chiffon, linen or cotton will look beautiful - they allow air to pass through in hot weather, which allows the skin to breathe and regulate body temperature. For autumn, a more suitable option would be knitted fabric, velor or cashmere.

The sleeve can be of different lengths, usually a shorter one is taken for summer, and a longer one for cool weather. The universal length is ¾, it looks best on such models, placing a beautiful emphasis on the hands.

2016-12-23 Maria Novikova

How to sew the simplest blouse for beginners? How to sew a blouse at home with your own hands? How much fabric do you need for a blouse and what fabric should it be made from? This and much more is always of first interest before sewing a fashionable blouse. In my master class I will tell you how to sew a summer blouse quickly and easily. The style of the blouse is loose-fitting without a collar with a placket in front.

A simple DIY rustic blouse that is sure to brighten up your wardrobe. We look at the photo and sew the blouse ourselves.

Model selection

This time I decided to sew a rustic-style blouse or fly-out blouse from staple fabric with a floral pattern. Why rustic style? Nowadays it has become common to wear clothes in ethnic style, eco style and rustic style. All these styles readily took root in everyday wear, i.e. in casual style. You can find out more about rustic and other styles in articles and.

What material is best to make a blouse from?

But that’s not the only reason why I was attracted to such a simple style. To sew clothes in a rustic style, natural fabrics such as cotton, linen, wool, and silk are used. They help maintain healthy skin and give a feeling of comfort to the whole body. I have already written about the advantages of natural fabrics in an article.

What to wear with a rustic blouse?

With the right selection of things, you can learn how to create different looks: business, casual, and in some cases evening.

For example:

  • Pairing a rustic blouse with jeans for a casual style;
  • to create a business style: blouse +, trousers, jacket;
  • evening style: blouse + skirt/pants + ;
  • to create an ethno style you can use a blouse and suitable accessories;
  • for those who like experimenting, you can try mixing different styles. Then it will be possible to get yours;

Another main advantage is the versatility of a rustic blouse in terms of size and age. This blouse will look great on both thin girls and those with curvy figures. In addition, it can be worn by both young girls and mature women.

The role of rustic style in the world around us

My experience confirms that after using the blouse I became much closer to nature. I felt like an integral part of it. I felt a strong connection to my homeland and my nation. If you believe that the right clothes, namely clothes made from natural fabrics, change consciousness, this means a way out of many problems.

The very simplicity and ease of the rustic style throws aside the desire to look expensive and glamorous. The desire to live large and spend resources on expensive clothes, thereby proving one’s worth.

The most unfortunate thing is that fashion is changeable and every year requires replenishment of the wardrobe. Throwing old clothes into a landfill causes global pollution of nature, especially due to synthetic materials. Just imagine, every year the consumer boom for clothing is growing rapidly, thanks to low prices for cheap, low-quality items.

By using natural fabrics in production, there is a chance to keep the planet clean and healthy. After all, our health and the health of our future depend on it. Natural materials decompose easily and do not harm the earth like synthetic materials do.

If at this point you are thinking about my words, find smarter ways to get rid of old things. For example, alter clothes - do it or donate it to charity. But it is best to buy or sew clothes as needed. Only when it is really necessary, and not “just once.”

How much fabric do you need for a blouse?

To sew a blouse you will need:

  1. Fabric (in my case it’s a staple) – product length + sleeve length + 30.0 cm.
  2. Glue () – 20.0 cm.
  3. Threads in the color of the fabric – 1 pc. for sewing, 3 pcs. for overlock
  4. Buttons – 3 pcs.
  5. Finishing braid – 30.0 cm (depending on the depth of the fastener)
  6. Sewing supplies

Cut out blouses

One day, while sorting through my piles of fabrics and unfinished items, I came across a dress. She pulled him out of captivity and carefully placed him in a visible place. I thought and thought about sewing it for me? Just the day before I finished sewing myself classic trousers link, the idea arose by itself.

Cutting a loose ruffled blouse with your own hands for beginners is not at all difficult. You can take a pattern 1-2 sizes larger (the size depends on the degree of freedom of the blouse) with sleeves and a chest dart. Or make changes to your pattern by adding extra freedom in the chest, waist, hips and sleeves. If you're having trouble altering your pattern, take a look here.

Sewing a blouse

Before moving on to sewing, I first tried on the dress to confirm the length of the blouse and make some changes. After that I started work. If you don’t know where to start trying on, you will find answers to questions in the article.

Processing chest darts

First I sewed the bust darts and ironed them to the top.


How to sew a blouse with a yoke on the back

Now you can move on to cutting out the yoke on the back. The yoke has a curly shape, so during fitting, its position is marked on the back. Then fold the back in half and align the intended line.

From the resulting line, an allowance width of 1.5 cm is laid upward and cut along the new line. The cut off upper part of the back will serve as a template.

On the back, place a counter or bow fold (during the fitting, I did not take the excess into the side seams and armhole, so I made a fold) and stitch it to the width of the allowance.

If you find unfamiliar words, then contact and.

Modeling a blouse with a yoke

Using the template, cut out 2 yoke pieces from the fabric. Add an allowance of 1.5 cm along the bottom edge and another 1.5 cm (the missing amount on the template that was left when cutting out the yoke). As a result, you need to add an allowance of 3.0 cm along the bottom edge of the yoke. If you do not take into account the increase of 1.5 cm, the back will be shorter.

Connecting the yoke to the product

Take one piece of the yoke and attach it to the back with the right sides facing inward, align the cuts and baste the yoke.

Then take the second piece of the yoke, align the front side of the yoke with the back of the back, align the cuts and baste.

Sew the yoke details to the back.

Press the seam with an iron.

This way the allowances should be inside between the yokes.

On the front side, place a finishing stitch 0.1 - 0.2 cm from the seam.

Processing side seams



Basic blouse

Lay the blouse out on a flat surface, aligning the side seams and the yoke seams. Pin them together with tailor's pins. For ease of installation, pin around the armhole and neckline. Draw the armhole using the reference marks after fitting. Add an allowance of 1.5 cm, cut off the excess.

Align the neck depth with the reference points on the shelf and back (if any).

Cut off the excess under No. 1. Now set aside a facing width of 3.5 - 4.0 cm from the neck line and decorate it with a smooth line. From this line up, set aside an allowance of 0.7 - 1.0 cm. Cut out the resulting parts - they will serve as templates for facing No. 2.


How to cut a neck facing

Transfer the resulting templates onto paper.

Using paper templates, cut out the facing parts: 2 back facing parts (with folds), 2 front facing parts with cuts. Add allowances of 0.7 - 1.0 cm.

Glue with adhesive fabric 1 part of the back facing and 1 part of the front facing, consisting of 2 symmetrical parts.

How to sew a front placket on a blouse

To process the fastener you will need 2 strips. The length of the straps = the length of the fastener + 1.5 cm, the width of the 1st strap (3.5 - 4.0 cm) + 1.0 cm multiplied by 2. It turns out 1 strap in a cut of 9.0 - 10.0 cm. Before processing the fastener, adhesive fabric is glued to half of both strips.

After that, loops are sewn on the right bar.

Before processing the fastener with strips, mark a frame in the center of the shelf with a width of 3.5 - 4.0 cm. It is drawn in the same way as a frame for a welt pocket. Then the frame is cut along the center line, not reaching the end of the frame by 1.5 cm. Next, the strips are basted along the intended lines; the cuts may not coincide due to the difference in allowances.

You will find how to process a pocket into a frame with a zipper in the article.

Sew the strips within 1.5 cm of the end of the frame.

At the end, cut the frame into corners not reaching 0.1 - 0.2 cm from the lines.

On the wrong side, fasten the corner of the frame together with the slats on the machine.

Overlock the edges with an overlocker.

On the front side, place a finishing stitch along the frame.

Or decorate a blouse:

How to finish the neckline of a blouse without a collar

To do this, you will need pre-glued neck facings.

We baste the facings to the front and back.


We grind it on a machine.

We cut allowances to 0.5 cm.

Iron the seam allowances towards the facing.

Then we join the shoulder seams together with the facing. We sew the cut and iron it onto the back. This is one way! You can also pre-join the facing parts, finish the shoulder seams and only then stitch the facing around the entire circumference of the neckline. The facing seams should match the shoulder seams.

On the wrong side, cuts are placed on the curves, and on the front side, an edging is sewn in.

The cut of the bottom facing is folded and sewn to the product.

A finishing stitch is laid along the upper facing, while simultaneously securing the folded cut of the lower facing. Carefully iron the facing, trying not to move the iron from side to side. This will lead to deformation of the facing.


Sew a loop on the facing and sew on the buttons.



Sleeve processing

Stitch, overcast and press the seams on the sleeves.


Hosing of sleeves

According to the model, the bottom of the sleeves is designed with a slight bevel. To do this, measure 5.0 cm from the bottom of the sleeves along the top seams and draw a line. Trim off the excess.

To finish the bottom of the sleeves you will need bias tape made from the same fabric. Therefore, on a suitable piece of fabric we find an angle of 45 degrees and cut out 2 strips 3.5 cm wide and 20.0 - 25.0 cm long.

Then we put stitches for assembly along the hem and the bottom of the sleeves.

How to finish the bottom of a sleeve with a piping stitch

Connect the binding on the bias so that it is closed, and press the seam. Gather the bottom of the sleeve according to the circumference of the trim.

Place the trim at the bottom of the sleeve with the right side facing the back of the sleeve, aligning the edges and seams. Sew the binding to the sleeve.

Then go around the seam with tape, fold the cut and stitch again 0.1 - 0.2 cm from the fold.

Process the bottom of the second sleeve in a similar way.

Connecting sleeves to the product


Finishing the bottom of a blouse with a Moscow seam

Processing cuts

To process the bottom, you first need to process the side cuts. I processed the incisions with a Moscow suture. Why? If you process the cuts in the traditional way, i.e. with open cuts, then when worn, the allowances will bend to the front side. And sometimes they are even visible along with the stitching, especially in light fabrics. Therefore, in order to get the job done cleanly, I decided to process them with a Moscow seam.

First you need to cut off the allowances along the cuts to 0.5 cm and process them with a Moscow seam.

Sewing a loose blouse with your own hands in a rustic style is not difficult. It is enough to have experience working with a sewing machine. Many of you, after reading my article, will decide that sewing a blouse is easy and quick for me. But I can say right away that a few years ago, sewing a collarless blouse with straps was difficult for me. Why?

There just wasn't enough detailed information on the topic. I had to learn from my mistakes and draw conclusions. Now I am happy to share my many years of experience on how to sew a beautiful blouse with my own hands with you. I hope my master class on how to sew a summer blouse will bring you a lot of benefit.

P.S. Don't forget to leave your comment below!

And also your questions and wishes.

Subscribe to blog news to receive the latest articles.

All the best! Peace, light and good mood to you!

Sincerely yours, Maria Novikova.

Stop being a gray mouse, join the ranks of the fashionable and stylish! Don't know how? I will help you!
Right now, place an order for a personal pattern or consultation on sewing and cutting clothes. Including consultation on the choice of fabric, style and personal image.

My . I'm on Twitter. Watch on Youtube.

I would be grateful if you use the buttons: