Good afternoon, craftsmen! Shouldn't we put our skillful hands to work on a three-dimensional image of snow? We have already cut snow-white ones from paper. It's time to boost your creativity and learn how to make voluminous paper snowflakes with your own hands.

What do you think will help us make not only beautiful, but also original New Year’s decorations for the home? That's right - desire and fantasy. And the videos and cutting templates that I have thoughtfully prepared will help you move in the right direction. Well, let's get started. I think you can’t wait to pick up paper and scissors.

The snow particle, with the creation of which we will open a master class, is not only the simplest. She is also the most graceful. A real winter beauty! And the exciting process of making it will help answer the question of how to make voluminous paper snowflakes without spending a lot of time and effort.

What you need to prepare for a simple job

  • Two white leaves (A 4);
  • Scissors;
  • Glue.

How to make a miracle - a snowflake


Nuance! The rays of both fluffs should be directed in different directions. And one more thing: if you plan to hang it, then at this stage you need to secure a loop of thread. It is pasted between two copies. The glue will dry, and you can decorate the Christmas tree with a masterpiece.

Looking at our voluminous beauty, the soul simply sings: “Oh, what bliss, to know that I made this perfection!”
Fluffy volumetric paper snowflake

Tell me, what adjectives come to mind when we say the word snow? White and fluffy. This is how a snowflake, in my opinion, should be dazzlingly white and fluffy. We will now start making such a winter miracle.

Fluffy and voluminous snowflake

For one fluff we need

  • Two sheets of white writing paper, size A 4;
  • Scissors;
  • Glue.

Important clarification! The thinner the paper and scissors are, the fluffier and more voluminous your snowflakes will turn out.

Step by step process

  1. Take one piece of paper. We fold it in such a way that we can cut out a square. To do this, the short side of the sheet must be attached to the long side. They folded it and smoothed the fold with their hands. It turns out that we see a triangle.

  2. Let's cut it off. Thus, from one sheet we got two parts - triangular and rectangular. We put them aside for a while.

  3. Fold the second leaf in half and cut it into two halves along the fold.

  4. Now we need to divide each half into parts. We fold them one by one like the first sheet, divide them into triangles and rectangles.

  5. We select the necessary details. We will need three folded triangles. A large rectangle and one small one.

  6. We fold the large rectangle so that we get two folded triangles from it. To do this, you need to bend the leaf on both sides. Folded, cut out.
  7. We do the same with the small rectangle.
  8. Let's count the details again. Now we have seven triangles. One large, and three smaller pairs. Moreover, each pair is different in size.

  9. Fold each triangle in half 3 times.
  10. Cut off the excess paper slightly diagonally.

  11. We make frequent cuts with scissors from the cut line towards the top. The cuts should be made with a slight slope.

  12. We do the same with the rest of the preparations.
  13. Carefully unwrap our little fluffs. They are already making us happy. But there will be more!

  14. Now comes the fun part - creativity. We are assembling a volumetric version. I am sure that you have already grasped the idea: a large snowflake will be the center of the volumetric version. Three fluffs of different sizes will be attached on both sides, each of which will be smaller than the previous one.
  15. We take the biggest fluff. Lubricate the middle with glue.
  16. We plant a snowflake with a smaller size on the glue. This must be done in such a way that its rays are located between the rays of a larger specimen.
  17. In the same way we attach two other parts to this side.
  18. We proceed in a similar way with the design of the other side. We glue three blanks in stages - middle to middle.
  19. Let the glue dry. Let's fluff up our crystal.

Ready! Isn't this a piece of the dazzling snow that we enjoy in winter? She will adequately decorate the house for her favorite holiday and will spin at the slightest movement of air. A fairy tale, and nothing more!
By the way, if you want to attach a snow-white product to any surface, then you should not decorate the other side. And from the remaining blanks, you can make a smaller voluminous beauty.

Volumetric paper snowflake in kirigami style

Friends, it seems to me that we will soon turn from self-taught people into real masters. Don't believe me? In vain! Now we will master Japanese art. And how to make a three-dimensional snowflake out of paper using the kirigami technique will not be a problem for us. A three-dimensional highlight will become a real New Year's attraction in our home.

For a unique and simple job we will need

  • A piece of bright colored paper. Choose it so that the reverse side is a different color;
  • Scissors;
  • Pencil and ruler as needed.

Step-by-step creative work

  1. Cut a square from a leaf.

  2. Fold it four times.

  3. Bend diagonally.

  4. Use scissors to straighten the bottom.

  5. Cut out an isosceles triangle at the bottom. If you are not confident in your abilities, it is better to use a ruler and pencil.
  6. Stepping back seven millimeters from the cut, we cut out triangles on both sides. Pay attention to the fact that they must be symmetrical.

  7. We move to the top. We make two cuts on both sides of the corner. And one more on whichever side is more convenient for you.

  8. Now carefully unfold the workpiece. We smooth it with our hands.

  9. Now comes the most interesting part - the corners need to be bent up or down. Do this freely, as you please. At this stage, we understood why double-sided colored paper is needed. Our Japanese beauty is not only voluminous, but also colorful. And you can hang it on any side!

  10. In order for our work to look decent, let’s smooth it with an iron.

Now we’ll hang the bright overseas guest among our snow-white crystals. Agree that the result is a spectacular picture, worthy of a pen. What great fellows we are!

Volumetric paper snowflakes. Templates for cutting using the kirigami technique

Now you can improve your skills and make three-dimensional snowflakes in the Japanese style with more elaborate patterns. To do this, I suggest looking at the cutting templates I liked. With their help, you can cut out as many as three types of original New Year's decorations.


Volumetric paper snowflake made from toilet paper rolls

Dear colleagues in the workshop, now I suggest you get down to the ground (after high art) and look around. After all, you can create voluminous beauty from improvised paper products! Toilet paper rolls will come in handy here more than ever. What wonderful snowflakes they make!

Preparing materials

  • Roll;
  • Scissors;
  • Glue (PVA, or any other);
  • Paints, gouache, glitter, confetti, any other decor you have available.

Step-by-step actions


Well, who would have thought that such splendor could be created from the notorious roll of toilet paper! Be sure to make this New Year's decoration. Amaze everyone, I'm one hundred percent sure.

Volumetric paper snowflake made from strips of paper. Video tutorials with various options

A voluminous fluff made from simple strips of paper turns out gorgeous. Airy and tender. It feels like it’s about to spin and fly away. Let's hurry up and make this version of the festive decoration of the house.

For work you will need the following accessories:

  • White A4 paper (you can also use colored paper);
  • Scissors;
  • Stationery knife;
  • Glue;
  • Ruler;
  • Stapler.

I should immediately note that for one snow-white fluff you will need twenty stripes.

Step by Step Actions

  1. Take a sheet of paper. We need to cut it into strips half a centimeter wide. This needs to be done along the long side. It will be more convenient if the strips are marked and cut using a ruler and a stationery knife. Please note that all stripes must be even.
  2. We take 10 strips and divide them into two groups of five pieces.
  3. We lay out 5 pieces vertically on the table. We maintain the same distance between the parts.
  4. Now let's work horizontally. We interweave the stripes of the second group with a mesh with vertical stripes. The mesh should look like even squares. We glue the contact points for strength.
  5. From the remaining strips we will prepare the same blank and let the glue dry.
  6. We take one workpiece and place it directly on the work surface.
  7. We place the second one on top, but with an offset of forty-five degrees.
  8. Let's start creating. We lift the two outer strips of the lower workpiece, bring them up and fasten them with a stapler to the middle strip of the upper workpiece.
  9. We carry out a similar procedure with the other two lower strips - attach them to the upper middle one.
  10. We put our hands on other rays, doing similar actions.
  11. Then we turn the semi-finished product over to the other side and secure the remaining strips.

What a beauty we have, we can’t take our eyes off it! In fact, you can glue a variety of volumetric options from paper strips. Therefore, I suggest watching visual lessons that will help you make a wide variety of voluminous snowflakes.

Friends, I think that the New Year holidays have already gone well for us. How could it be otherwise, surrounded by such snowflake splendor! Well, isn't it? So there is a reason to call your friends and invite them to visit. And at the same time, tell us about our wonderful blog, where we find sources of inspiration. Happy New Year and see you again!

On the eve of the New Year holidays, you need to think about decorations so that they are ready in advance. Of course, today you can, at any time, go to a store or supermarket and buy everything you need, but the costs will be enormously high.

Therefore, it’s worth figuring out how to make voluminous paper snowflakes for the New Year with your own hands, using step-by-step instructions and photos. In this case, everything will work out fine for you.

A New Year's atmosphere and comfort in the apartment can be created with the help of paper parts, as they have the appropriate aura. We will start decorating with snowflakes, which are very easy to make. To do this, you will need a minimum set of materials and office supplies.

When making such simple paper and decorative counterfeits, we very often hear about new technologies. The 3D prefix is ​​a simple designation of the volume that we will give to our snowflakes. The presented part can be placed in the form of a Christmas tree decoration, parts of an entire garland, and so on. They can be very easily tied together with one thread and hung on the wall.

First you need to prepare the following supplies:

  • paper;
  • scissors, stapler
  • stationery;
  • glue.

We perform the actions in the following order:

At the first stage, we are making a stencil that will allow us to make an ideal version of a snowflake; it will also help us make a lot of such fakes. To do this, you will need cardboard, draw 6 lines on it at an angle of 90 degrees, they should be placed parallel to each other, the distance between the lines is 1 centimeter. We do everything according to the photo.

We fold six landscape sheets diagonally. We make cuts according to the prepared stencil. As a result, we get 6 triangles with cuts placed parallel to each other.

Take one of the triangles and unfold it. That is, we get a square with even smaller squares placed inside it. We start with the central one, turn its corners to the center and glue them.

We turn the workpiece over to the other side and repeat the steps with the next square. We should end up with an icicle. We do the same with the rest of the blanks.

We fasten our icicles to each other. It is best to do this in stages, that is, we fasten one block of three blanks, then make another block of the same kind. At the last stage, we use a stapler to connect the resulting two blocks.

Figure No. 5

This is a very interesting and widespread technique that is easy to implement. Thus, it will be very easy to make voluminous snowflakes from paper with your own hands for the New Year using step-by-step instructions and photos.

Volumetric snowflakes

Making large-scale fakes is a labor-intensive task, but the result will really please you. If you want to decorate your home and create a New Year's atmosphere, then you definitely need to do these decorations. Of course, they will be different from those we did before, but they will be superior in beauty. we learned, now we’ll look at how to make a snowflake out of paper.

To do this you need to prepare the following materials:

  • A4 paper;
  • stationery;
  • thread, needle;
  • red patch.

Making a volumetric snowflake is carried out according to the following recommendations:

  1. On a piece of paper we draw four circles of equal diameter. The size of the future snowflake will depend on the radius of the circles.
  2. We cut out the circles and divide them into eight parts using a ruler. They must be equal in size and shape.
  3. We make cuts along the lines towards the center so that it looks like a flower.
  4. We bend the tips of each petal to the center and fix it with glue. We perform the same manipulations with the remaining three circles.
  5. We sew all four snowflakes together or glue them together. We should get a voluminous fake.
  6. A red patch is needed to complete the product. Cut out a small circle from it and glue it in the center of the snowflake.

The idea is quite interesting and easy to implement. Our voluminous paper snowflakes, made by hand for the New Year, according to step-by-step instructions and photos, will turn out incredibly interesting and attractive.

Origami

Today, there are so many technologies that help users achieve their goal of making colorful jewelry. You can make voluminous snowflakes from paper with your own hands for the New Year using step-by-step instructions and photos in various styles. Japanese masters have long developed a lot of such trends. Some of the most common variations:

Two-color origami

For many users, origami is a very complex technique, but in fact, if you do everything consistently, the result will really please you. Concentration, experience and the ability to work with your hands, all of this together will allow you to make not only three-dimensional origami snowflakes, but also learn other similar styles.

Snowflake origami

Many people are familiar with the presented technique for making snowflakes. You need to fold the paper sheets in such a sequence that you get a certain shape. Most often we end up with a 3D product. The advantage of the technology is that there are no additional materials; we only need paper and the ability to work with our hands. Of course, not everyone succeeds in folding origami the first time.

Snowflake karigami

The complexity of performing the karigami technique is quite high, since to implement the idea you will need to learn a little. Snowflake-karigami is made in the form of sequential folding of a paper sheet. Next you need to make cuttings of certain patterns.

Modular snowflake

The most complex and painstaking method is creating a modular snowflake, but at the same time it is really interesting and mysterious. Some people refer to this style as origami. To implement the presented task, you will need to prepare many small parts that must be connected in series. Any blot will lead to the fact that nothing will work out for you.

Modular snowflakes are often made from strips, since the presented parts help to regulate the size and length of the snowflakes.

To create the presented fake we will need the following accessories:

  • paper strips (width 5 millimeters);
  • scissors;
  • glue.

It is worth noting that the width of the stripes affects the size and volume of the future snowflake; you can take strips with a width of 1-2 centimeters, it all depends on your imagination and wishes. Let's start making:

  1. First you need to prepare the strips. They must be the same width and we cut them out of a simple album sheet. The length of each will be different: you need two 21 centimeters, two 19 centimeters and one 25 centimeters.
  2. Glue the ends of each strip together. We wait some time for our preparations to dry. Then we form a sheet from them. If you cannot make the workpiece secure, then instead of glue you can use thread and a needle.
  3. Using a similar technology, we make 8 more such sheets, you can take even more, it all depends on your idea. The most important thing is that your workpiece dries well at each stage, since reliability will depend on this. Then we start assembling all the parts.
  4. Cut another strip from a thick sheet of paper. The width of the presented element should be 1 centimeter and glue it into a circle.
  5. We attach all our blanks, made in the form of leaves, to the circle. If you are not sure about the reliability of the entire snowflake, then it is better to glue the petals to each other first, and then attach everything to the base.

There is another common and popular method. It is a little more complicated, but the result is incredibly interesting. Prepare 6 strips about 24 centimeters long in advance.

  1. We intertwine the strips with each other. A square is formed in the center of the workpiece. The strips must be secured with a stapler.
  2. We connect the strips that are located next to each other. We should get a shape resembling a leaf. We repeat the same steps three more times.
  3. At the last stage, we glue all our petals together to create a three-dimensional snowflake. You can fix it with glue or a stapler, but in the second case it will be more reliable.

You can make voluminous snowflakes out of paper with your own hands for the New Year using the step-by-step instructions and photos provided in the shortest possible time. You will prepare a wide variety of decorations that will be stored for a very long time. This way, every New Year you will take them out of the box and decorate your home.

Snowflakes-balls

Snowflakes-balls are interesting because they are very easy to make. You will need a minimum amount of materials, and the result will be really interesting. The presented technique is used extremely rarely, but still gives an incredibly good effect in creating a New Year's atmosphere in the apartment.

How to properly make a snowflake using the presented method:

You need to take a piece of paper and draw 12 equal-sized circles onto it using a compass. The presentability of your fake will depend on the size ratio. In this case, they must be perfectly even.

Cut out the circles and bend them all in half. Next we stack them on top of each other. It is best to use multi-colored circles to create some interesting composition in the style of a gradient and so on.

Place the stack of blanks under a heavy book for 20-30 minutes. This is done so that the fold line is clearly visible.

We straighten our circles and, using a stationery stapler, fix them to each other, as shown in the figure. The main thing is that the paper clips are located along the fold, so they will be invisible and the snowflake will turn out to be perfectly symmetrical.

Let's start creating the form. We straighten each circle and glue the individual sides to each other, as shown in the photo. The connection style is very interesting: the top of one semicircle needs to be connected to the bottom of another, and everything needs to be done in that order.

The result of the work done will be an incredibly beautiful and interesting fake. It’s very easy to make all the voluminous snowflakes presented out of paper with your own hands for the New Year; step-by-step instructions and photos presented in our article will help you with this.

DIY snowflakes are the most affordable and simple New Year’s decoration for your home, school or workplace. You can make them from the most ordinary paper, cutting them out according to ready-made templates and diagrams, which can be found in large quantities on the Internet. You can also make a beautiful snowflake, large and voluminous, or using quilling or origami techniques. Moreover, as a source material, in addition to white paper, newspaper sheets, pages of an old book or an unnecessary music notebook are also suitable. Such non-standard material, especially if it is artificially aged with coffee, will give the finished craft a special charm. As for the manufacturing technique, most master classes for New Year's snowflakes are quite simple and can be reproduced even by children, for example, as part of a labor lesson at school. In our article today, we have collected for you a whole selection of original templates and patterns for cutting out beautiful paper snowflakes for adults and children. In addition, here you will find interesting step-by-step master classes with photos of snowflakes, as well as videos with lessons on how to make them yourself.

Simple DIY paper Christmas snowflake 2017 for children, master class

First, we invite you to master a very simple DIY paper Christmas snowflake master class for children. It is so affordable that it is suitable even for kindergarten. To make this simple DIY paper Christmas snowflake for kids, you can use either plain white paper or colored sheets. Thin corrugated paper also works great.

Necessary materials for a simple DIY paper snowflake for children

  • sheet A4
  • scissors
  • felt-tip pens
  • scotch
  • stapler
  • decor (sequins, rhinestones, buttons)

Instructions for a DIY New Year's snowflake master class for children

  1. We cut the sheet into strips 2-3 cm wide and about 15-20 cm long. The number of strips will determine how voluminous the craft will be in the end.
  2. We wrap each strip on a felt-tip pen or marker, securing the edges with paper tape.
  3. Leave the pieces for at least an hour so that they take on a wave-like shape.
  4. We remove the paper strips from the markers and connect them together using a star-shaped stapler.
  5. We decorate the ugly junction with bright sequins, beads or rhinestones. Also, if desired, you can add pieces of New Year's rain or glue confetti. Ready!

Do-it-yourself volumetric snowflake 2017 made of paper, master class with photo

Do-it-yourself voluminous paper snowflakes are considered one of the most complex in terms of technique. However, if you have detailed instructions with step-by-step photos at hand, as in our next master class, then you should not be afraid of difficulties. We assure you that after the first self-made voluminous snowflake made from paper with your own hands, the remaining copies will “go like clockwork.” See for yourself by following the instructions below.

Necessary materials for making a voluminous paper snowflake with your own hands

  • sheet A4
  • scissors
  • tape or glue

Instructions for a master class on DIY 3D paper snowflakes

  1. For the next craft you will need a rectangular sheet with the following parameters: length - 25 centimeters, width - 18 centimeters.
  2. We bend the lower left corner of the sheet inward, as in the photo below.
  3. Trim off the excess edge to create an isosceles triangle.
  4. Fold the triangle in half.

  5. Using scissors, make two shallow cuts on the tight side of the fold, as in the next photo.
  6. We unfold the workpiece so that we get a diamond with cuts. We connect the inner corners of the central cut together using tape or glue.

    On a note! If you use glue, be sure to additionally secure the workpiece, for example, with a clothespin until it dries completely.

  7. We repeat the procedure with the next edges of the cut, fixing them in the opposite direction with the first workpiece.
  8. We will also fasten the edges of the last cut together, but in the opposite direction.
  9. The result should be the following design.
  10. For one volumetric snowflake you will need from 6 to 8 such blanks. They can be made in different colors to add color to the craft.
  11. Using tape or glue, secure all the blanks according to the template below.

Beautiful large snowflakes 2017 made from paper yourself - step by step with photos

You can make a beautiful paper snowflake with your own hands for decoration and in quite large sizes. Such decor will certainly attract everyone's attention and will become an interesting interior solution on the eve of the New Year. Learn how to make a beautiful large snowflake out of paper with your own hands step by step from our next master class.

Necessary materials for a large DIY paper snowflake

  • sheet A4
  • Ruler and pencil
  • clothespins
  • New Year's garland, glitter

Instructions for a step-by-step master class on a large beautiful snowflake with your own hands

  1. First you need to cut thin paper strips in the amount of 20 pieces, 10 strips on each side. The longer they are, the larger the finished craft will be. Then we lay out five strips in a row at small intervals, and lay out five others on top according to the braided principle.
  2. We turn the resulting workpiece so that it lies in front of us in the form of the letter “X”. Now we connect first the adjacent and then the outer strips and glue them. Secure the top with clothespins until completely dry.
  3. Repeat on each side. As a result, there should be one strip on each side, forming a thin cross.
  4. Leave the workpiece to dry completely for about half an hour. Then we remove the clothespins and move on to the second identical part of the craft.
  5. We connect both parts together by rotating the bottom part of the snowflake 45 degrees. Now the free strips can be fixed with the ready-made beams.
  6. We glue them with glue and secure them with clothespins, leaving them to dry completely.
  7. All that remains is to decorate the finished snowflake. This can be done using pieces of New Year's garland and sparkles.

    On a note! Instead of glitter from the store, you can use broken Christmas tree decorations. To do this, carefully crush the glass toy wrapped in thick fabric with a rolling pin. The resulting crumbs must be mixed with transparent glue and then used to decorate crafts.

    DIY snowflake 2017 from a book for the New Year, step-by-step master class

    In the next step-by-step master class we will make snowflakes for the New Year with our own hands from an old book. This is a great way to breathe new life into its yellowed pages. You can’t call a snowflake from a book for the New Year with your own hands (step-by-step master class below) a simple children’s craft. Small children definitely cannot handle it. This is more of a master class for creative adults who do not perceive making New Year's decorations solely as child's play. On the contrary, they are happy to create beautiful and exclusive decorative elements.

    Necessary materials for a snowflake from a book for the New Year

    • book sheets
    • glitter
    • ruler and pencil
    • scissors
    • fishing line or thick thread

    Instructions for a step-by-step master class on snowflakes from a book for the New Year

    1. First you need to draw book sheets into strips 2 centimeters wide.
    2. For one side you will need 7 such strips: 1 the full length of the page, two 2 centimeters shorter, two more 2 cm shorter than the previous ones, and two strips 6 centimeters shorter than the first.
    3. The longest strip should be folded in half to form a loop, gluing the bottom edges together. On the sides you need to fold the strips shorter, also gluing their lower parts, as in the photo below.
    4. Repeat similar manipulations with the remaining strips and fix them under heavy pressure, for example, a table lamp.
    5. When the workpiece dries, you should additionally secure its edges with thin fishing line. In general, you will need 6-8 such blanks for one snowflake.
    6. Again, cut the book sheet into strips of equal length. Cut and roll into a tight ring, tie with fishing line. The ring can also be additionally coated with transparent glue.
    7. After complete drying, you should proceed to joining the craft. To do this, coat the end of the workpiece tightly with glue and connect it to the ring.


    8. Repeat with each workpiece.
    9. To better fasten the snowflake, coat the outer loops of the adjacent rays of the snowflake with glue.
    10. Small sparkles are suitable as decoration and should be applied to the side edges of the snowflake. You can also use pieces of garland, sequins, and small beads.
    11. Then you need to make a loop from the fishing line so that you can attach the snowflake, for example, to a Christmas tree. Ready!

    DIY paper snowflake for children using origami technique, master class

    The art of origami is multifaceted and complex, but with the right instructions using this technique you can make a fairly simple craft with your own hands, for example, a children's snowflake. True, to be completely frank, the following master class with photos cannot be called made exclusively using the origami technique. In it, for a child's DIY paper snowflake, in addition to the origami technique, you will also use threads and scissors.

    Necessary materials for origami children's snowflakes for the New Year

    • thick colored sheet
    • pencil and ruler
    • needle and thread
    • scissors

    Instructions for a master class on children's snowflakes using the origami technique

    1. To begin, we cut out a strip 5-7 cm wide and about 20 cm long. Using a pencil and ruler, we make notes on every centimeter along the length. We cut out an imitation of a “fence” on top, as shown in the photo. In the middle of the resulting columns we draw small diamonds. Then we mark the middle of each centimeter with dots and pierce them with a thin needle.
    2. Now we take a ruler and place it on top of the first line dividing our “fence” section in half. Carefully bend the workpiece inward, and then remove the ruler and bend it in the opposite direction. We repeat the same with each section. The result should be an accordion, as in the photo below.
    3. We hold the accordion tightly with the fingers of one hand and use scissors to cut out the previously marked diamond shapes in the middle of each section.
    4. We take a needle and thread and carefully thread it through the small holes that we already pierced with the needle two steps ago.

      On a note! The thread needs to be thick so that it holds the finished structure tightly!

    5. When the thread has already passed through all the points, we reinsert it into the first hole to close the structure.
    6. We remove the needle and begin to gradually tighten the thread until a tight ring is formed. We tie the thread into a knot, and place a spool on top of the snowflake to straighten it.
    7. We form a loop from the remaining thread and our children's snowflake is ready! And for those who want to master the pure origami technique for creating snowflakes, we have selected a video tutorial with a step-by-step diagram below.

    Do-it-yourself openwork snowflake using the quilling technique, master class with photos

    Quilling is the real art of weaving amazingly beautiful crafts and cards from simple strips of paper. Using the quilling technique, you can create truly unique openwork snowflakes with your own hands, a direct confirmation of which is our next master class with step-by-step photos. But the most amazing thing is that by swapping individual parts and adding new elements, you can create several different openwork snowflakes with your own hands using the quilling technique according to one general pattern.

    Necessary materials for an openwork snowflake using the quilling technique

    • pencil and ruler
    • scissors
    • glue and brush

    Instructions for a master class on openwork snowflakes using quilling techniques

    1. Using a ruler and a simple pencil, you need to draw a sheet. To do this, make 0.5 cm marks along the width of the sheet and draw lines along the entire length. Then we cut out the strips with scissors.
    2. To form the rolls you will need an awl. We wind the strip onto it quite tightly, and then let the roll unravel a little and glue the edge to its base.
    3. The snowflake will be based on one round element and six drop-shaped rolls. To get an element in the form of a drop, you need to lightly squeeze one edge of the round roll with your fingers. We connect the structure with glue.
    4. Now add six eye-shaped rolls to the base. We will also make them from round rolls, but by flattening both edges with our fingers. Glue the “eyes” between the drops according to the template below.
    5. Now we need small rolls, so we fold the standard strip in half and cut it into two parts. From each small strip we twist a small round roll. To begin with, you will need six of these elements.
    6. We glue small rolls along the edges of the elements in the form of a cat's eye.
    7. We roll six standard large rolls.
    8. We glue them to the drop-shaped elements, as shown in the diagram below.
    9. Now we need six square rolls. We will form them from standard round ones, slightly flattening the sides into a square shape.
    10. We glue the squares to the large round elements, having first turned them into the shape of rhombuses.
    11. All that remains is to twist a large round roll according to the standard pattern and glue it to the top of our craft. Let the snowflake dry completely and thread the thread through the large roll. Ready!

    How to cut a New Year's snowflake 2017 from paper with your own hands, diagrams and templates

    The easiest way to make a New Year's snowflake with your own hands is to cut it out of paper according to a ready-made template or diagram. Such simple, but at the same time very beautiful DIY snowflakes are available primarily for children's creativity. However, there are quite complex patterns with which you can make even large and voluminous decorative snowflakes, which in their originality will not be inferior to crafts using the origami or quilling technique. Do you want to know how to cut a beautiful New Year's snowflake out of paper with your own hands? Then you will find a selection of photo templates and patterns for adults and children, as well as video tutorials below.

With the onset of winter and the approach of the New Year, which envelops us in its magic, buildings and streets are filled with snowflakes, both real and artificial. Applied arts that allow you to create amazingly beautiful snowflakes are a great way to spend time on the eve of the New Year holidays.

Snowflake decorations are most often made from paper. Paper is a plastic material that has the ability to take on different shapes. Snowflakes are made by cutting out paper blanks, embossing and folding. These techniques can be combined or used separately.

Not so long ago, paper snowflakes had almost no differences. A few years ago, these decorations were cut mainly from white napkins. The configuration turned out to be identical, only the design was different.

Do you need homemade decorations?

Today, techniques for making snowflakes have become more diverse. Various creative techniques make it possible to make New Year's snowflakes that are similar in appearance, but have individual differences.

Of greatest interest are snowflakes made from paper blanks with a three-dimensional configuration. Making such beauty is not much more difficult than flat snowflakes.

There are many options for decorating rooms for the winter holidays. For this purpose, you can use purchased decorative items and make homemade decorations. Lately, many have opted for New Year's handmade items.

It takes time to create New Year's accessories, but the result is worth it. Thanks to homemade New Year's decorations and, first of all, snowflakes, you can decorate your home for the holidays quickly and originally.

The main task is to master the techniques for making three-dimensional snowflakes, and this article will introduce you to master classes and popular snowflake templates that you can draw or print and cut out.

After spending a little time, you will get acquainted with the most popular schemes for creating homemade snowflakes of various shapes.


Do-it-yourself voluminous paper snowflake, photo

Option No. 1 – decoration with twists

This option for creating a homemade 3-D paper snowflake, the peculiarity of which is its three-dimensional configuration, is worth trying for those who want to decorate the room with large decorative elements. The design of such snowflakes can include several colors at once. Of particular interest are the transitions of tones in a circle.

Make six square pieces of paper with the same dimensions.

Important! The radius of the decoration will coincide with the diagonal of the square-shaped paper part; Taking this point into account, first decide what format of snowflakes you want.

In addition to paper, you will need scissors, a simple pencil and glue. You will need a ruler for marking, and a stapler to fasten the parts.

Let's look at the scheme for making a three-dimensional New Year's snowflake in more detail:


If you do not fully understand the scheme for making a snowflake yourself, watch the video: the master class will help you create a paper decoration:

Option No. 2 – template decorations

Involve children in arts and crafts. Jointly creating New Year's accessories using templates is a great opportunity to chat with children and help them learn new creative techniques that will certainly be interesting to them. Together with your children, make homemade paper decor in the form of three-dimensional snowflakes.

To make a 3D decoration, you just need to fold the pieces in a circle and then glue one on top of the other; In this way, you will create a three-dimensional snowflake from flat elements.

Those who are not going to make a three-dimensional decoration by gluing together several identical pieces should use the “accordion” technique - it is quite simple.

Fold the paper sheet like an accordion and fold it in half, then make markings.

The paper turned out to be too thick, and you can’t immediately cut out a solid product? It’s easy to solve the problem - draw markings on one side and the other of the accordion: this technique will save you from the need to fold a sheet of paper in half. In addition, using this technique, you can create details of halves and quarters of future snowflakes. The blanks are laid out and then glued together.

The photo shows an easy-to-create version of jewelry, but you can make more unusual designs. Attach loops to the snowflakes or combine them, thereby making a garland, and decorate the room for the New Year holidays.

To better understand the accordion technique, watch the video demonstrating how you can make a voluminous paper snowflake step by step:

Option number 3 – snowflake star made of paper strips

Let's look at another simple and yet interesting technique for creating paper snowflakes with a three-dimensional shape with a step-by-step technique, perfect for beginners. This technique in most cases involves the use of paper, which is used in the quilling technique. Such paper can be purchased at stores offering handicraft supplies.

If you can’t find special paper, plain paper sheets will do. In addition to paper, prepare brushes, glue and clothespins.

Step-by-step instructions for making a star snowflake:


Option number 4 – flower snowflake

Snowflake decorations, reminiscent of flowers in appearance, will add tenderness to the festive decoration of the room and help create a fairy-tale atmosphere.

Let's start making a flower snowflake. To make such a decoration, you will need a landscape sheet, a pencil, an eraser, scissors and stationery glue.

Use these instructions to make a voluminous flower snowflake for the New Year:


You can look at the technique of making a flower snowflake in more detail in this video:

Option No. 5 – decoration using quilling technique

New Year's quilling decorations are very popular: they look much more attractive than standard decorative elements. Quilling snowflakes decorate windows, Christmas trees, walls, and you can also use them to decorate a holiday table. Often such jewelry is made in several colors and decorated with sparkles to make them more vibrant.

First, cut the strips: their number depends on the configuration of the future decoration. The length of one strip is 15-25 cm and the width is approximately 2 cm.

The most important part of the job is to curl the strips correctly. To prevent the strips from losing the required shape, coat them with glue. It is recommended to secure the round parts with a clothespin until they dry.

After finishing preparing the parts, assemble them into a snowflake. Glue the elements to each other. In the middle of the decoration, place a circle consisting of several layers - one folded strip. To make your work more convenient, use a thread spool.

The final step is decorating and fixing the resulting snowflake. You can start decorating only after the parts have dried and adhered well.

Video with a master class on making homemade quilling snowflakes:

Option number 6 – beautiful snowflake with rhinestones

This scheme for creating a New Year's paper snowflake is one of the simplest, even children can master it.
You will need paper in at least two different colors, scissors, rhinestones for decoration and stationery glue.

Let's start creating a snowflake.

Make square-shaped paper blanks of identical sizes - and form them into a cone, one corner should stick out from the back side. Fix the parts with glue at the base, thanks to this they will securely hold the structure.

Fix all the details in a circle and repeat these manipulations, then you will get a decoration consisting of several layers.

Decorate the snowflake with beads and rhinestones to make it brighter.

Option No. 7 - modular snowflake

We bring to your attention another scheme for making paper New Year's snowflakes, the peculiarity of which is their three-dimensional form: decorations are created from several parts in the origami style.
Make rectangular paper blanks - they should have identical dimensions.

The technique for creating blanks will become more clear if you look at the photo:

Place the triangles one on top of the other, securing with glue. It is advisable to first decide on the color and configuration of future snowflakes. First try connecting the parts without glue.

By fixing the triangular blanks, you will get an origami-style snowflake decoration from the modules.

In this article, we looked at the most popular techniques for making New Year's snowflakes from the most common material - paper, the peculiarity of which is their three-dimensional configuration. Paper makes it possible to bring many original ideas to life; thanks to even very simple stencils you will get fabulous holiday snowflakes.

Another video instruction for creating a homemade paper snowflake using an original technique:

The New Year makes you believe in miracles. Create wonderful New Year's decorations with your own hands. Beautiful paper snowflakes will allow you to decorate your home in a New Year's way. Decorative elements that keep the warmth of your hands will make the atmosphere not only festive, but also cozy.

Be inspired by the beauty of New Year's accessories, create mini-masterpieces and delight others with designer decorations.

What is it difficult to imagine the New Year without? Of course, bezels, Santa Claus, and for us, residents of northern latitudes, it is extremely difficult to imagine the New Year without snow and snowflakes! If you want to create a truly New Year's atmosphere in your home, then don't be lazy and decorate everything around with snowflakes. Snowflakes can be flat or voluminous, carved or not. In addition, it is worth abandoning the stereotype that you can only make a snowflake out of paper. This is not so, and in this article you will find more than 50 master classes on making snowflakes with your own hands from a variety of materials!

Well, do you want to turn your home into a fabulous snowy kingdom? Then let's go!

Paper snowflakes

Simple snowflakes for kids

#1 From paper strips

The simplest paper snowflake that can be made with preschool children. Pre-cut paper strips need to be glued together with a star, and then each strip should be decorated. Anything will be used: felt-tip pens, pencils, stickers, paints, etc.

#2 From handprints

Here is another simple and original way to make a snowflake with children. Cut out 6 handprints from paper. Then you cut out patterns on them, glue them together and decorate.

#3 From twisted paper strips

Here's another simple way to make a snowflake. Screw 6 paper strips onto felt-tip pens and leave for several hours. Then remove them and fasten them together with a stapler. Decorate the center with paper circles. The snowflake is ready!

Snowflake cutouts

When it comes to snowflake crafts, the first thing that comes to mind is cutouts. A white sheet of paper or napkin is folded into a triangle in a special way, and then an intricate pattern is cut out of the triangle. Afterwards the sheet unfolds and we get a patterned snowflake.

Without some experience, carving a truly carved snowflake is quite difficult. Therefore, you can look at our ideas for patterns, and after a few self-cut snowflakes, ideas will come to mind!

Volumetric snowflakes

Volumetric snowflakes look very beautiful, which can be made from plain paper. In terms of production, there is nothing complicated in such a craft. Just follow the master class and everything will work out!

#1 Volumetric geometric snowflake

To make such a snowflake you will need 6 identical paper rectangles. Fold the rectangle in half and make 4 cuts: two long and two short. And then look at the picture.

#2 Snowflake-flower

To make a flower snowflake, prepare 6 strips of paper. Roll each of them into a cone and secure with a stapler. Glue the cones with the tops to the base in the form of a circle, and place a bead in the center. The finished snowflake can be further decorated

#3 Origami

Here is a step-by-step master class on making snowflakes using the origami technique.

#4 Snowflake made from component parts

A voluminous snowflake made from component parts that has won the hearts of millions of people around the world. The craft is very simple to make, but looks very impressive. Try it too!

#5 Snowflake 3D

And another version of an unusual 3D snowflake, which is very simple to make, but looks no less impressive than the previous one.

#6 Snowflake-flower

And here is a step-by-step master class on making a flower snowflake. Watch and repeat.

#7 Snowflake made of stripes

And here is a variant of a voluminous snowflake made of narrow stripes. You will need 10 thin strips of equal length. Now place five strips in front of you on the table, and put the remaining five perpendicularly and thread them in a checkerboard pattern through the first five. The result should be a kind of wicker “rug”. Now we begin to connect the strips that are close to each other. To do this, first lubricate their ends with glue and then carefully fasten them together. As a result, you should get something resembling a leaf. Now, using the same scheme, we make a second snowflake and connect them: we glue the free strips of one snowflake into the petals of the other.

#8 Volumetric snowflake

And another diagram of a three-dimensional snowflake made of paper strips. The manufacturing scheme differs from the previous one only in details: the number of strips and the method of connecting them. All the nuances are clearly visible in the step-by-step master class.

#9 Composite snowflake

And one more MK.

#10 Snowflake medallion

You can make a voluminous snowflake medallion out of paper. Fold a rectangular sheet of paper like an accordion. Then draw a pattern on each accordion element and cut it out. Now the only thing left to do is connect the leaf into a ring and tie it with thread along the bottom edge. The craft is ready!

#11 Volumetric snowflake

And here is a simpler version of the previous snowflake. You can start with this MK, and then complicate it using the top option.

#12 Fluffy snowflake

And finally, a very simple tutorial for making a fluffy snowflake. Fold the sheet of paper according to the standard pattern, trim off the excess and cut the edges into thin strips. Repeat the procedure 2-3 times and glue the snowflakes together. Fast and beautiful!

You may be interested in:

Time runs inexorably forward and now white flies are flying outside the window, slowly falling to the ground and covering everything around with a snow-white fluffy blanket. However, despite the cold, my soul is warm and joyful. And all because suddenly appearing snowflakes herald the coming of the New Year. The most important holiday of the year is already very close, which means it’s time to think […]

Felt snowflakes

One of the most favorite materials for crafts among needlewomen is felt. And this choice is very justified. Felt makes cute crafts and toys. By the way, you can make a snowflake out of felt with your own hands. It can be an embroidered blank, a toy in the shape of a snowflake, or you can make a craft in the form of a Christmas ball with an embroidered snowflake. In general, at your discretion.

More felt crafts:


The New Year holidays are approaching, which means that very soon a forest guest will appear in almost every home in our country. Some people prefer to put up an artificial Christmas tree, some prefer to put up a real forest spruce from a Christmas market, and some even confine themselves to pine branches. However, this is not so important, because the most important feature of the New Year tree is the toys. Since ancient times, people in [...]

Snowflakes made from popsicle sticks

Healthy snowflakes are made from popsicle sticks. This craft is ideal for children's leisure time; older children will find it too easy. I think the essence of making snowflakes from ice cream sticks is clear even without our descriptions. The whole point here is decoration, and you can borrow ideas for decoration from us!

#1 Decor with thread

#2 Sequins, rhinestones and pompoms

#3 Colored tape, cotton balls, stickers

#4 Buttons

#5 Threads, tinsel and sequins

#6 Feathers and sparkles

#7 Giant snowflake made from popsicle sticks

#8 Multi-colored sequins

Snowflakes made of fluffy wire

Unusual snowflakes can be made from fluffy wire. Flexible twigs can be twisted together in different combinations, and the fluffy “coat” makes the craft voluminous, so you can do without additional decoration of the finished product.

#1 Wire only

A beautiful snowflake can only be made from wire. To do this, you will need twigs of different lengths: longer (for the base) and shorter (for decorating the rays). You can come up with your own design, but use our ideas for inspiration!

#2 Wire and beads

Having connected the wires in the shape of a star, put several beads on each beam, and so that they do not fall, twist the end of the wire.

#3 Fluffy wire and crystals

We make a snowflake from fluffy wire. Then we prepare a saline solution for growing crystals (you can buy it ready-made in the store). Next, lower the snowflake into the solution and wait. In a few days, crystals will grow on the snowflake blank. This is such an unusual craft, and also educational.

#4 Fuzzy wire and salt

We assemble a snowflake from fluffy wire, coat the finished product with glue and sprinkle with coarse salt. By the way, you can first mix the salt for the craft with silver or white sparkles, then the snowflake will shimmer in the light, just like a real one.

Snowflakes made from cotton swabs

And here is another option for crafts for creative needlewomen - snowflakes made from cotton swabs. When your baby needs to be occupied and there is nothing left for creative materials, it’s time to look for an alternative.

#1 Sticks and stickers

#2 Application

#3 More ideas for snowflake shapes for applique

Snowflakes from drinking straws

You can make a snowflake from drinking straws. The tubes play the role of rays, and you can make additional structural elements from other materials.

#1 Tubes and paper

For example, an additional design element of a snowflake can be made of paper. Cut out two circles, glue tubes to one of them, and cover with the second on top. The top of the circles can be further decorated.

#2 Tubes and pasta

And here is an example of a snowflake made from a tube and pasta. A snowflake is made in the form of an applique. You can come up with combinations of elements in the diagram yourself. By the way, you can safely do this craft with kids, they will be delighted!

By the way, you can only make snowflakes from pasta. They make great crafts if you get a little creative!

See more pasta crafts:


New Year's holidays are approaching, which means it's time to think about creating a festive atmosphere. You don’t have to use store-bought accessories for decoration. It's time to unleash your creativity and make original crafts with your own hands. If you are one of those people who are creative about once a year, then New Year’s crafts from [...]

Snowflakes from clothespins

If you have unnecessary clothespins in your home that have been hanging around idle for several years, then it's time to give them a new life! On the eve of the New Year holidays, absolutely everything goes into crafts, suitable for snowflakes and clothespins!

#1 Snowflake with bead

You can make such a snowflake from ordinary clothespins, decorated with beads, with your own hands. You need to remove the middle from the clothespins, then glue the wooden bases with the back side, fold them with an asterisk (secured with glue), and then paint and decorate with beads.

#2 Composite snowflake

And for this craft you will need clothespins of different sizes. Make two snowflakes: a larger one and a smaller one, and then glue them on top of each other with a slight offset, so that the rays of one star are in the spaces between the rays of the other star.

#3 Shiny snowflake

And this snowflake is very similar to the first one, only the method of decoration is different. As you can see, you can decorate a snowflake made from clothespins exclusively with sparkles. It looks very cool and stylish, and most importantly, no one will ever guess that these are ordinary clothespins!

#4 And more ideas on the shape of snowflakes from clothespins

Here are a few ideas for making snowflakes from clothespins of different shapes. Take note and give your clothespins a new festive life.

#5 Another way to glue clothespins

If there are only six clothespins, then pay attention to the way they are glued together. It can be useful!

Snowflakes from toilet rolls

Original snowflake crafts can be made from toilet paper rolls. As a rule, the products turn out to be large and quite durable, so such a snowflake will decorate the Christmas tree or interior for many years!

#1 Prefabricated structure

A large snowflake made from ordinary toilet cylinders, decorated with sparkles. Cut the toilet sleeve into rings of the same size. Glue a flower out of six. Glue birds from other rings into each petal and insert them between the main petals along the ring. After the structure has completely dried, decorate it with sparkles.

#2 A la quilling

Making crafts using the quilling technique is difficult and painstaking work. A beautiful snowflake using the quilling technique can be made from toilet paper cylinders. You will find a step-by-step MK below.

#3 Big snowflake

Here's a big snowflake made from toilet rolls. The bushings are cut into rings of equal sizes, and then glued together in the shape of an asterisk. The finished product can be decorated with paints and sparkles.

#4 Another big snowflake

And another version of a big snowflake. In general, it’s up to you to decide how exactly to glue the rings, in what order and according to what pattern. You can easily come up with your own unique snowflake from toilet paper rolls. Our MKs are designed only to inspire you to come up with cool ideas!

More toilet roll crafts:


The New Year holidays are approaching, there is less and less time left, and there are more and more worries and hassles in preparing for the holiday! It is especially difficult for mothers during these pre-holiday days. Little fidgets are looking forward to the holiday, so mothers have to come up with interesting games and activities every day. If your imagination no longer works, our cool master classes on making New Year’s crafts from […]

Beaded snowflakes

Difficulties do not frighten real needlewomen, but on the contrary, they provoke and spark interest. Easy snowflake crafts for wimps! A true creator wants complexity and sophistication. If you are one of these people, then you definitely need to make a snowflake from beads!

#1 Snowflake two-color

You can weave snowflakes of the most unusual shapes from beads, but we will start, perhaps, with the simplest one. For training, so to speak. The detailed diagram is presented below. Explore and try! You can come up with the combination of colors and their order yourself.

#2 Beads and bicones

But here is a slightly more complex design, in which, in addition to beads, beads in the shape of two folded cones are used - bicones. The step-by-step master class is described below.

#3 Beads and round beads

And here is a snowflake made of round beads in combination with beads. You can choose the color arrangement yourself, and see the picture for a step-by-step scheme for making a snowflake.

#4 Beads and bicones

And here is another pattern for weaving snowflakes from beads. Please note that in addition to beads, this product also contains beads of another shape - bicones. Instead of bicones, you can use round beads, cathedral beads, barrel beads, etc.

#5 Beads, bicone and bugles

To make these snowflakes you will need: beads, bicone and glass beads. You, of course, can use beads of other shapes, but in any case, follow the pattern, then the snowflakes will turn out to be truly curly.

#6 Beads, bicone and round beads

To make such a snowflake you will need not only beads, but also beads of other shapes: round and bicone. You will find a step-by-step weaving diagram below.

#7 Bead embroidery

You can not only weave with beads, you can also embroider with beads. An excellent example of bead embroidery is a snowflake. You will need a felt flower, each of the petals of which will be embroidered with beads. The center can be decorated with a button, bead or glass bead.

See more bead craft ideas:


On New Year's Eve, craftswomen especially want to create. After all, this holiday is a real storehouse of inspiration; many festive ideas are spinning in your head, full of the desire to recreate a winter fairy tale. A little craftsmanship and imagination will help bring the festive atmosphere into reality. You can create real masterpieces from small glass beads. In this article we have collected for you more than 50 schemes and master classes [...]

Snowflakes made from wooden corks

Wooden corks can be used as improvised materials for making snowflakes. Although, this idea would be more suitable for restaurant owners or people who drink a lot of wine! In any case, take note, maybe you’ll be collecting corks all year (for example, I’ve been collecting toilet paper rolls all year :)) in order to make such an unusual craft by next year.

More ideas

The ideas for making snowflakes don’t end there. You can make a winter craft from any available materials, you just need to use your imagination a little and success is guaranteed. Here are some more original ideas for making DIY Snowflake crafts.

#1 Bead applique

A snowflake can be made in the form of a painting. To do this, take plywood of a suitable size and cover it with fabric or tape. Applique a snowflake from beads on top of the finished “canvas”. The craft is ready and looks very impressive!

#2 From candies

Another original idea for a snowflake is to make a craft from candies. For this design you will need New Year's candy canes in the form of a cane. Glue them according to the MK template below. Such a snowflake will not only please the eye, but also the taste buds!

#3 Cotton balls

If you want to make a New Year's snowflake craft with your kids, then take note of this master class. By the way, grandparents will appreciate such a gift. For this craft you will need: cotton balls, PVA glue, a sheet of colored paper.

#4 Candy wrappers

This idea is suitable for those with a sweet tooth. There are still benefits from sweets! You can make wonderful snowflakes from wrappers. The wrapper needs to be folded in four and then cut out into an intricate pattern. You can decorate your interior, Christmas tree, and even gifts with these snowflakes.

#5 Plastic bottles

Well, this idea will fit perfectly into the interior of those who care about the environment. You can make wonderful snowflakes from plastic bottles, which will become an excellent element of New Year's decor. Cut off the bottom and paint it with paints. The snowflakes are ready, and most importantly, the bottles do not pollute the environment and are pleasing to the eye!

#6 Crispy sticks

Who didn't eat snowflakes as a child? I think there are no such people! Well, since the kids eat them anyway, we need to make some delicious snowflakes for them! You will need crispy sticks (salted or unsalted), white chocolate and decorative sprinkles.

#7 Mosaic details

It's hard to find a child who doesn't have a mosaic. And it’s even more difficult to find a child who has all the details in the mosaic. They are always going somewhere. Well, if you have a set in which there are not enough parts and assembling the picture is not interesting, do not rush to throw it away. From the remaining parts you can make a New Year's snowflake. Well, shall we create?

#8 Thread and paper plate

You can also make snowflakes from ordinary paper or plastic plates. By the way, even kids can cope with such a craft, but mother’s help will, of course, be needed. You will find a step-by-step MK below.

#9 Salty dough

Another available material from which you can make a snowflake with your own hands is salt dough. Make the dough (1 tbsp salt, 1 tbsp water, 1 tbsp flour), roll it out, cut out snowflakes, and then decorate them. Dough snowflakes can be painted, covered with glitter, beads, or left just white.

#10 Eco snowflake

Lovers of eco-decor can make a snowflake from twigs. You can find sticks on the street or in the forest. All that remains is to come up with a pattern and glue the sticks together. Good luck!

#11 Wax drawing

Here is another version of a snowflake for creativity with children. You will need a sheet of paper, a candle, and watercolors. Use a candle to draw a snowflake on paper, and then paint the sheet with paints. In those places on the sheet where the wax remains, the paint will spread and the result will be an unusual pattern, just like Frost paints on the windows on a frosty day.

Help us improve: if you notice an error, select a fragment and click Ctrl+Enter.