Knitted knee socks have been at the peak of the trend for more than the first winter; fashionistas will not soon forget about them. Therefore, it’s not too late to pick up knitting needles or a crochet hook and knit a warm pair for yourself.

Yarn selection

The choice of yarn for hosiery always requires a special approach, and knitted knee socks are no exception. This is due to the fact that the heels are often rubbed, so the threads must be very strong. Take a delicate, thin fiber - and the product will quickly become unusable. Although there is a way out of this situation. You can choose yarn that is similar in color and texture. Knit the foot from the harder one, and put the soft one on the boot. This way it will be possible to maintain the necessary strength, and at the same time the soft yarn will look more elegant.

The choice also depends on the time of year when you are going to wear your knee socks. For winter, of course, the choice falls on warm wool. The threads can be quite thick, but too much density is also useless. In very thick knee socks, the leg will look sloppy; only very thin girls can make such a choice. Yarn with a small addition of elastin or other stretchy components is excellent for golf socks. This recommendation is especially important if you are going to knit a product that fits tightly around the legs. Otherwise it will be very difficult to calculate all the additions and decreases. In addition, the problem of shrinkage often arises, and the knee socks become impossible to tighten.

Knitting with knitting needles

To make knee socks with knitting needles, you need to choose the yarn you like, suitable for all parameters, and a corresponding set of 5 knitting needles. Usually socks and knee socks are knitted in the round. But you can cheat a little and knit the foot as a footprint, and the boot with a separate fabric. Then carefully sew everything together with a special needle. Needles for sewing knitted items are made of plastic; the blunt end easily fits into the knitting holes, but does not damage the thread.

When knitting in the round, beginning knitters should pay great attention to the joints between the knitting needles. If the tension is weak, too large holes often form in these places. The simplest pattern for knitted knee socks is elastic. Even a beginner can handle this work, and the elastic band will give the product the necessary elasticity, and the item will fit perfectly.

Another popular pattern is various braids. Making them is also easy, but you will need special pins or clips to remove the loops. More complex patterns need to be carefully calculated, and this cannot be done without knitting a sample.

Take the hook

Crocheted knee socks are perfect. A hook is more versatile than knitting needles; it can be used to knit both warm winter and openwork summer knee socks. In addition, it is easy to crochet a variety of ruffles and overlays. The product is knitted in the round, starting from the top. To make the work easier, you can knit in a spiral rather than in a circle. This is only possible if you do not use complex patterns.

One way to expand the knitting is to change the hook instead of adding loops. A wider hook produces larger loops, but at the same time the density decreases. For example, the toe and heel can be knitted more tightly to make these areas more durable. The same technique is used to make flounces on knitted knee socks.

Openwork knitting

Do you like beautiful knitted knee socks? Schemes and descriptions of developed models for every taste can be found in specialized publications. Considering that vintage is in fashion now, old books are of particular interest, where you can find many interesting patterns.

For summer socks, it is better to choose mercerized cotton or thin synthetic thread. They turn out to be breathable and dense enough to serve their owner for a long time. It is more difficult to knit with thin yarn; such work is not recommended for beginning needlewomen. If you decide to take on this work, it is best to use ready-made diagrams. Don't forget to practice the pattern so that it looks perfect in the finished work.

Do-it-yourself knitted knee socks will help fashionistas save money. They are not cheap in stores, especially for natural fibers. Buying several skeins of yarn is much cheaper. In addition, independent work will help you create an original style. You won’t have to run around looking for a suitable pair and end up buying what you have and not what you want.

Knitting knee socks according to the pattern with description

With the onset of the first cold weather, people begin to urgently insulate themselves. Warm jackets, knitted hats, scarves and, of course, knee socks are used. After all, it is warm knee socks that best protect women’s legs from the cold. Especially if their owner wears a short skirt instead of practical jeans or warm trousers.
In this educational step-by-step knitting master class we will talk about how to knit a beautiful stylish model of women's knee socks. It will appeal not only to experienced, but also to novice craftswomen who for the first time decided to try their hand at such an important task as knitting warm knee socks.

Master class on knitting warm golf socks

In winter and late autumn it is very cold outside. Therefore, all fashionistas have to warm up, while giving up their favorite shorts and short skirts. If you don’t want to give up minis during the cold season, you need stylish knitted knee socks. They will not only perfectly warm you up in the cold, but will also complement your look, making it more stylish, original and bright!


Knitting such an unusual model of women's knee socks is very simple. Even novice craftswomen will be able to do this task! In order to make beautiful elegant knitted knee socks with your own hands you will need:

• thick wool or cotton yarn;
• knitting needles – 5 pcs.;
• scissors;
• hook;
• two circuits that will be demonstrated in this article.

Before you start creating women's socks according to the description, create a small sample to determine the knitting density. This will make the work much easier for novice craftswomen. The following abbreviations will be used throughout the job description:

• n. - loop;
• persons – facial;
• purl – purl4;
• R. - row;
• chrome - edge.

We are starting a training master class with a detailed description of all actions. For knitting, a pattern called “Speck” is used. It consists only of faces. R. To knit a beautiful product that fits tightly to your legs, you must first take measurements. You need to measure the distance from the heel to the top of the shin, the length from the heel to the top fold and the width of your shin. The number of loops depends on these measurements. But, it must be divisible by 4, since we will be knitting golf socks on 4 knitting needles.
In this step-by-step master class, exactly 80 stitches will be cast on the knitting needles. This number of stitches must be distributed over 4 working knitting needles, so that each has 20 pcs. You cast on the loops based on the measurements taken! We knit according to the first pattern. We work based on the size of the shin. Having reached the part where the product narrows, that is, having knitted about 10 cm, we decrease the loops according to the pattern. Having completely formed the narrowing area, we knit again using the pattern for beginners. Having knitted the product to the heel, put 2 and 3 knitting needles aside. We continue work 1 and 4.
We create the required height for the heel. We combine all stitches with 1 and 4 knitting needles. It’s probably no secret that the heel of knee socks wears out much faster than other areas of the product. Therefore it needs to be compacted. To do this, you need to knit the heel according to the following pattern: chrome. we remove the p., we perform one stitch, we remove 1 p., we knit 1 and so on until the end of the row.
We knit the next row, that is, the wrong side of the product according to the description. n. We do not remove the hinges. Using this simple description for beginners, we knit the entire height of the heel. That is, about 4-7 cm.


At this stage of the master class, we need to divide all the loops between 3 knitting needles. If you cannot divide by 3, transfer a little more stitches to the middle needle. We start knitting stitches from the central part and 1 side. We knit the last loop together with 1 stitch on the second side. Turn the product over and continue knitting using the same pattern.
Gradually, the shape of the knitted heel will become similar to a voluminous box. According to the description, we decrease stitches until there are no loops left on the side knitting needles. After the heel is ready, we move on to forming the sole.
On the side of future women's golfers we knit additional loops from the edges. When knitting the upper side sts, we make decreases according to the second pattern. According to this pattern, you need to knit part of the product up to the little finger. Then the loops are closed: 2 pcs. in every row.
To seal the finger area, it must be tied using the facial method. We told beginning craftswomen about it in more detail at the beginning of this training master class. To prevent knitted knee socks from slipping off the top of the product while wearing, you can tighten the elastic band using a hook.
Knitted knee socks are ready! We hope that this simple master class helped beginning knitters master the technique of knitting women's knee socks and now they will be able to please themselves and their loved ones with beautiful new clothes!

Video: Knitting knee socks with patterns

Photo MK knitting knee socks

Comments

Related posts:

Knitting bactus using knitting needles according to a pattern with a description (video lesson)

Beautiful snow-white knee socks, crocheted from delicate openwork patterns, will look great on your legs, emphasizing their slimness.

You will need: 150 g of white yarn, hook, elastic band.

Description of the process of knitting knee socks

Dial a chain of 72 chains and close it in a circle. Continue knitting according to pattern 1, gradually decrease the air loops in the pattern towards the ankle, in the arches - up to 5. Having knitted 54 rows according to pattern 1, continue knitting half of all loops according to the same pattern, for the second half, knit a chain of 36 chain stitches and based on it, knit the bottom of the foot, alternating 1 half double crochet and 1 single crochet. Knit 16 rows in this way, decreasing 1 tbsp. on both sides of the bottom of the foot.

For the toe, knit rows of st. b/n, evenly decreasing 4 tbsp in each row.

For the heel on one side of the left hole, work 36 tbc, then work 24 rows of dc, divide the work into 3 parts of 12 sts and knit 24 rows of dc on the center loops, with the last st in each row knit together with st. side parts. Sew up the resulting hole with a needle.

Thread a thin hat elastic along the top of the golf course.

The second patterned knee socks are knitted similarly, but according to pattern 2.

Crochet red booties

It turns out that knee socks can not only be purchased, but also uniquely knitted, not like everyone else’s. And your child will be different from other children.

Material: cotton yarn – ; 100 g. Hook 1.5 mm.

Description of work

Knit knee socks in the round. Start each row with 2 lifting loops and end with a half-column.

Cast on 3 air loops, then connect them into a ring with a half-column.

1st row: tie the ring with 10 double crochets;

2nd row: in each loop of the first row, knit 2 double crochets;

3rd row: 2 double crochets in each loop of the second row;

4th row: above each column of the third row, knit one double crochet;

5th row: same as 4th row;

6th row: * over 4 stitches of the 5th row, knit 4 double crochets, one chain crochet, skip 3 loops of the previous row, knit a bush into the fourth loop - 3 double crochets, 2 chain crochets and 3 double crochets , one air loop, skip 3 loops of the previous row *.

From the 7th to the 14th row: knit as the 6th row;

15th row (in this row, knit a hole for the heel): 2 double crochets, 20 chain stitches (very loose), skip 2 bushes and a dense path between them in the last row and knit the last two columns of a dense path with a double crochet.

The 16th row and all the following - according to the description of the fifteenth row.

Heel. Knit in the round without lifting loops with double crochets, making decreases in each row.

1st row: 40 double crochets;

2nd row: 30 double crochets;

3rd row: 20 double crochets;

4th row: 10 double crochets;

5th row: knit all the loops together.

For strings cast on a chain of 100 chain stitches and attach tassels to the sides. When tying the last row of golf with single crochets, involve the ties.

The height of the socks is optional. If you need an extra allowance for the calves, do it by knitting three chain stitches instead of two.

Crochet is not elastic, so knit loosely without tightening. Make fittings during the knitting process.

To crochet knee socks you just need to follow the description consistently. We offer an excellent model of beautiful crocheted openwork knee socks “Walking on Sunshine” from Drops Design.

Size: 35/37 - 38/40 - 41/43

Foot approx. 22 - 24 - 27 cm

Height approx. 32 - 35 - 37 cm

Yarn with wool and polyamide FABEL from Drops (205g/50m) 3 skeins, No. 111 mustard.

Hook 2 mm.

Sample: 28 stol.bn wide X 16 stol.bn vertically and 35 st.bn wide x 35 st.bn height = 10x10 cm.

Knitting tip:

Replace the first table 1nk for lifting 3 air.ptl. Finish the circle by knitting a joint stitch in the 3rd chain stitch at the beginning of the circle.

Reductions on the heel:

R 1 (= l / s): we knit 19-22-22 stol.bk, 8-9-9 stol.bk remains until the end of the row, reduce 1 stitch Turn.

R 2 (= i/s): we knit 12-14-14 dc, 8-9-9 db remains until the end of the row, decrease 1 stitch = 13-15-15 db, Turn.

R 3: knit 12-14-14 sc, turn.

Repeat row 3 12-14-14 hips in total, i.e. until there are 13-15-15 tables left in the center.

Knitting Openwork knee socks Walking on Sunshine (“Walk on the sun”) from Drops crochet:

Let's dial 98-105-112 air stitches and connect them in a circle by knitting a connecting column into the 1st air stitch. Next round: * Knit 1 chain stitch in the first 6 chain stitches, skip 1 chain stitch*, repeat from *-* = 84-90-96 chain stitch.

Next round: 12-15-18 st. 1nk, repeat A.1A (= 5 st. 1nk), repeat A.1B at 40 pt (= 2 repeats wide), knit repeat A.2C (= 15 st. 1nk), 12-15-18 table 1nk. Continue with the pattern, when pattern A.1 is completed once vertically, continue rapport A.1 X. AT THE SAME TIME, when it is 5-5-5 cm, decrease 1 stitch at the beginning and at the end of the row. Repeat decreases every 2 cm - 9-10-11 more times = 64-68-72 stol.1nc. We knit up to 25-27-29 cm. Now we will continue to work only on the heel in rows on the first 13-15-15 stol.1nc and on the last 14-16-16 stol.1nc in a circle. We knit 1 tbsp in each loop until approx. 5-5½-6 cm. Insert a marker - now measure from there!

Now you need to perform decreases for the heel.

After decreases, knit like this: 1 st. 1nk in each of the 13-15-15 st. bn on the heel, 14-15-16 st. 1nk along the edge of the heel, 1 st. st. 1nc on top of leg and work 14-15-16 st. 1nc along second edge of heel = 78-82-88 st. 1nc in round. Insert 1 marker on each side of the center 33-37-41 stol.1nk at the top of the foot. We knit in circles a st. 11-11-12 times (12-12-13 decreases in total) = 54-58-62 table 1nk. We knit up to 19-21-23 cm from the marker on the heel (= approx. 3-3-4 cm remains to the end). Insert a marker on each side of the sock so that there are 27-29-31 stitches at the top and bottom.

Finish like this: 1 round row, 1 tbsp in each loop AT THE SAME TIME, decrease 1 tbsp on each side of the mark, repeat these decreases in each round. row another 9-10-11 times (10-11-12 decreases total) = 14 stol.bn left. In the next round, knit all the stitches together in 2 rows. Cut the thread and pull it through the remaining stitches, pull and fasten.